Automation not firing, using two instances of BA
-
- Posts: 101
- Joined: Tue Nov 20, 2018 5:41 pm
Using enough automation rules that i have to open 2 instances of BA , seems to have screwed up automation firing properly, using same settings, checked nominated selections are correct, at a loss. Any thoughts ?
-
- Posts: 101
- Joined: Tue Nov 20, 2018 5:41 pm
Could it be an issue if both instances of guardian have to switch to the same market? Potential conflict?
Each instance is independent of each other so anything that happens in one won't effect the otherpeachflame wrote: ↑Tue Jan 03, 2023 2:42 pmCould it be an issue if both instances of guardian have to switch to the same market? Potential conflict?
A rules will either work or it won't irrespective of whether you have 1 or 10 instances open
-
- Posts: 101
- Joined: Tue Nov 20, 2018 5:41 pm
Attached rule files, I have A in one instance and B and C in the other. Both instances have refresh at 500 mil, switch market at 300 sec, and no restrict refresh
You do not have the required permissions to view the files attached to this post.
Just to clarify you can't pass information even via Stored Values between instances of Bet Angel - they are only applicable to the instance they were set inpeachflame wrote: ↑Tue Jan 03, 2023 3:00 pmAttached rule files, I have A in one instance and B and C in the other. Both instances have refresh at 500 mil, switch market at 300 sec, and no restrict refresh
If you weren't trying to do that I'd just need to see one file unless all three do different things and none are working?
-
- Posts: 101
- Joined: Tue Nov 20, 2018 5:41 pm
none of these rules use stored values, they all do different things, I just have them across two different instances to demonstrate problem. Today none have worked.Dallas wrote: ↑Tue Jan 03, 2023 3:50 pmJust to clarify you can't pass information even via Stored Values between instances of Bet Angel - they are only applicable to the instance they were set inpeachflame wrote: ↑Tue Jan 03, 2023 3:00 pmAttached rule files, I have A in one instance and B and C in the other. Both instances have refresh at 500 mil, switch market at 300 sec, and no restrict refresh
If you weren't trying to do that I'd just need to see one file unless all three do different things and none are working?
Ah OK, so,peachflame wrote: ↑Tue Jan 03, 2023 4:06 pmnone of these rules use stored values, they all do different things, I just have them across two different instances to demonstrate problem. Today none have worked.Dallas wrote: ↑Tue Jan 03, 2023 3:50 pmJust to clarify you can't pass information even via Stored Values between instances of Bet Angel - they are only applicable to the instance they were set inpeachflame wrote: ↑Tue Jan 03, 2023 3:00 pmAttached rule files, I have A in one instance and B and C in the other. Both instances have refresh at 500 mil, switch market at 300 sec, and no restrict refresh
If you weren't trying to do that I'd just need to see one file unless all three do different things and none are working?
Rule A - Can't seen any problems with that so no reason why it shouldn't place the three lay bets, although there is no reason to fix the order if applying the betting rules to nominated selections - but that won't stop it working either
Rule B - Same thing regarding the fix order rule
Rule C - also the same
I'll run all three together on the 17:00 but I can't see any reason it won't work its just nominating a runner to trigger on just after the race goes in-play
-
- Posts: 101
- Joined: Tue Nov 20, 2018 5:41 pm
Right, they're very simple rules that have always worked in a single instance of guardian, trying to run two instances it's been erratic at best
Are you using exactly the same settings files in both instances?peachflame wrote: ↑Tue Jan 03, 2023 4:30 pmRight, they're very simple rules that have always worked in a single instance of guardian, trying to run two instances it's been erratic at best
ie, one doesn't use a restricted refresh and or slower refresh rate while having more markets loaded?
-
- Posts: 101
- Joined: Tue Nov 20, 2018 5:41 pm
No double checked, they're exactly the sameDallas wrote: ↑Tue Jan 03, 2023 4:32 pmAre you using exactly the same settings files in both instances?peachflame wrote: ↑Tue Jan 03, 2023 4:30 pmRight, they're very simple rules that have always worked in a single instance of guardian, trying to run two instances it's been erratic at best
ie, one doesn't use a restricted refresh and or slower refresh rate while having more markets loaded?
Yes, thats two Guardians side by side above and a rule in each
-
- Posts: 101
- Joined: Tue Nov 20, 2018 5:41 pm
I ran a single instance, and everything trigged ok, now running two i'm noticing that refreshing seems to be an issue, even though both are set to 300 mil refresh the market volume number seems to update every 3 or 4 seconds or longer.