Hi,
When you select either one of the following prices in the parameters tab then they are not shown in the description column ?
Reverse market price
2nd best reverse market price
3rd best reverse market price
Thanks,
Updated beta version of Bet Angel v1.56.0 - Now on general release
-
- Posts: 3217
- Joined: Thu Oct 24, 2019 8:25 am
- Location: Newport
You do not have the required permissions to view the files attached to this post.
Hi, I have a rounding issue with my stored values when I set to round to nearest whole number.
If the answer is 2.5 it gets rounded down to 2, instead of 3. Example below
If the answer is 3.5 it does correctly round up to 4.
If the answer is 2.5 it gets rounded down to 2, instead of 3. Example below
If the answer is 3.5 it does correctly round up to 4.
You do not have the required permissions to view the files attached to this post.
Its working fine when I just checked itArchery1969 wrote: ↑Sat Apr 24, 2021 10:13 pmHi,
When you select either one of the following prices in the parameters tab then they are not shown in the description column ?
Reverse market price
2nd best reverse market price
3rd best reverse market price
Thanks,
Is it always missing for you?
ie, have you tried creating a new rule from scratch to see if it happens?
Just in case its something occurring after editing a certain parameter etc that could be recreated and fixed
Also is everything else displaying OK ie, all your other menus in the rules editor
Your Windows font scaling being set to high can cause parts of Bet Angel not to display fully/correctly
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3217
- Joined: Thu Oct 24, 2019 8:25 am
- Location: Newport
Hi Dallas,Dallas wrote: ↑Sun Apr 25, 2021 11:42 amIts working fine when I just checked itArchery1969 wrote: ↑Sat Apr 24, 2021 10:13 pmHi,
When you select either one of the following prices in the parameters tab then they are not shown in the description column ?
Reverse market price
2nd best reverse market price
3rd best reverse market price
Thanks,
Capture.JPG
Is it always missing for you?
ie, have you tried creating a new rule from scratch to see if it happens?
Just in case its something occurring after editing a certain parameter etc that could be recreated and fixed
Also is everything else displaying OK ie, all your other menus in the rules editor
Your Windows font scaling being set to high can cause parts of Bet Angel not to display fully/correctly
It’s when you select REVERSE prices.
Thanks,
I'll also ask them to check this, it may be tomorrow before they reply just depends who's around
Hi Dallas,
Ah yes I can see it now sorry I missed that initiallyArchery1969 wrote: ↑Sun Apr 25, 2021 12:44 pmHi Dallas,Dallas wrote: ↑Sun Apr 25, 2021 11:42 amIts working fine when I just checked itArchery1969 wrote: ↑Sat Apr 24, 2021 10:13 pmHi,
When you select either one of the following prices in the parameters tab then they are not shown in the description column ?
Reverse market price
2nd best reverse market price
3rd best reverse market price
Thanks,
Capture.JPG
Is it always missing for you?
ie, have you tried creating a new rule from scratch to see if it happens?
Just in case its something occurring after editing a certain parameter etc that could be recreated and fixed
Also is everything else displaying OK ie, all your other menus in the rules editor
Your Windows font scaling being set to high can cause parts of Bet Angel not to display fully/correctly
It’s when you select REVERSE prices.
Thanks,
I've flagged it to development who'll get that fixed next build, looks like its been like that a while, I've just tried V1.55 and its the same on that too
-
- Posts: 3217
- Joined: Thu Oct 24, 2019 8:25 am
- Location: Newport
Great stuff.Dallas wrote: ↑Sun Apr 25, 2021 1:01 pmAh yes I can see it now sorry I missed that initiallyArchery1969 wrote: ↑Sun Apr 25, 2021 12:44 pmHi Dallas,Dallas wrote: ↑Sun Apr 25, 2021 11:42 am
Its working fine when I just checked it
Capture.JPG
Is it always missing for you?
ie, have you tried creating a new rule from scratch to see if it happens?
Just in case its something occurring after editing a certain parameter etc that could be recreated and fixed
Also is everything else displaying OK ie, all your other menus in the rules editor
Your Windows font scaling being set to high can cause parts of Bet Angel not to display fully/correctly
It’s when you select REVERSE prices.
Thanks,
I've flagged it to development who'll get that fixed next build, looks like its been like that a while, I've just tried V1.55 and its the same on that too
I did mention it before in previous releases but it must have got lost.
Sounds like a tiny floating point inaccuracy on the PC. So the number is being stored internally as 2.4999999999 rather than 2.500000000.
We can look to workaround that in a future build, but for now you could probably fix the issue by multiplying by 0.250001 before rounding to nearest rather than using 0.25 exactly.
Thanks, multiplying by 0.250001 does the job!Bet Angel wrote: ↑Sun Apr 25, 2021 1:23 pm
Sounds like a tiny floating point inaccuracy on the PC. So the number is being stored internally as 2.4999999999 rather than 2.500000000.
We can look to workaround that in a future build, but for now you could probably fix the issue by multiplying by 0.250001 before rounding to nearest rather than using 0.25 exactly.
Sorry to trouble you Dallas but I don't appear to have the 'new toolbar buttons to Import/Export grid layout profiles' and I am running v1.56.0.
In the top image my buttons/icons are in the bottom right of the top image whereas yours are bottom left of the top image.
In the top image my buttons/icons are in the bottom right of the top image whereas yours are bottom left of the top image.
You do not have the required permissions to view the files attached to this post.
I re-installed v1.56.0 but that made no difference.
Then I changed my default custom grid layout to 'Manual bets A' and there they were - the new toolbar import/export buttons appeared as if by magic
...and when I changed back to my custom grid layout the import/export buttons are still displayed.
Sometimes trial, error and persistence is the best solution
Then I changed my default custom grid layout to 'Manual bets A' and there they were - the new toolbar import/export buttons appeared as if by magic
...and when I changed back to my custom grid layout the import/export buttons are still displayed.
Sometimes trial, error and persistence is the best solution
This morning all!
When logging in this morning the import/export buttons were gone again - they didn't return when changing my default custom grid layout to 'Manual bets A' as had worked last night, nor when changing to the 'Greening Layout' that I downloaded and installed last night...but they did return when changing the grid layout to 'One-click C' grid layout !
Perhaps this small bug could be looked into
When logging in this morning the import/export buttons were gone again - they didn't return when changing my default custom grid layout to 'Manual bets A' as had worked last night, nor when changing to the 'Greening Layout' that I downloaded and installed last night...but they did return when changing the grid layout to 'One-click C' grid layout !
Perhaps this small bug could be looked into
Just answered on the other thread you posted it toTuco wrote: ↑Thu May 06, 2021 11:14 amThis morning all!
When logging in this morning the import/export buttons were gone again - they didn't return when changing my default custom grid layout to 'Manual bets A' as had worked last night, nor when changing to the 'Greening Layout' that I downloaded and installed last night...but they did return when changing the grid layout to 'One-click C' grid layout !
Perhaps this small bug could be looked into
I have had an issue since Markers came out, where Markers and their Style in Ladder Settings, keeps reverting back to Border, despite being set to a different Style like Vertical or Horizontal etc.
Sometimes it is only shown as a Border in the left "box", but not actually saved and overwriting the Style. It just says it is a Border in the Drop down, yet it is in fact a different Style rather than Border.
Other times, the Style changes automatically, when going from changing one Marker, to another Marker that I do not want changed.
Also a related suggestion:
I have over 50 Markers, and the "box" on the left that shows them in Ladder Settings, is very small, and hard to read, when having many different markers with different naming - it would be great if that could be resized as we can with other "boxes" such as the Conditions for Automation.
I feel like I have had similar issues in Ladder Settings on Advanced area, where I have over 20 Information Items, although I have not changed them in a while, so I am not sure. But the left "box" with Additional Items would also be easier to deal with, if it was resizable.
Thank you
Sometimes it is only shown as a Border in the left "box", but not actually saved and overwriting the Style. It just says it is a Border in the Drop down, yet it is in fact a different Style rather than Border.
Other times, the Style changes automatically, when going from changing one Marker, to another Marker that I do not want changed.
Also a related suggestion:
I have over 50 Markers, and the "box" on the left that shows them in Ladder Settings, is very small, and hard to read, when having many different markers with different naming - it would be great if that could be resized as we can with other "boxes" such as the Conditions for Automation.
I feel like I have had similar issues in Ladder Settings on Advanced area, where I have over 20 Information Items, although I have not changed them in a while, so I am not sure. But the left "box" with Additional Items would also be easier to deal with, if it was resizable.
Thank you