Updated beta version of Bet Angel v1.56.0 - Now on general release

Post Reply
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

berianua wrote:
Thu Mar 11, 2021 12:44 pm
Thank you for your response. I tried different soccer games all around the world but same massage pop up all the time :This market is not suitable for Soccer Mystic. All markets????
I don't know what to do.
Thank you again
Replied on the Soccer Mystic thread
viewtopic.php?f=17&t=19374
fractalmodel
Posts: 58
Joined: Thu Jun 23, 2011 1:22 am

The best refresh rate I can get is 200ms. Have I missed something in the settings? Nothing shows lower in the dropdown
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

fractalmodel wrote:
Wed Mar 17, 2021 2:27 pm
The best refresh rate I can get is 200ms. Have I missed something in the settings? Nothing shows lower in the dropdown
You need to enable Streaming in your communications settings
https://www.betangel.com/user-guide/sup ... rates.html
Korattt
Posts: 2405
Joined: Mon Dec 21, 2015 6:46 pm

superb having top / bottom markers now available, for me it makes things a lot less clunky & easier to work with, could have done with a middle option also but happy with this
Korattt
Posts: 2405
Joined: Mon Dec 21, 2015 6:46 pm

not sure if I’ve found a bug or not but working out two sets of averages as a stored value with using identical stored values doesn’t work, 2nd stored value as an average displays the same average as the 1st stored value

i.e.

SV’s

xxx1
xxx2

SV average of the two above = xyz

SV’s

xxx1 (as above)
xxx2 (as above)
xxx3

SV average of the three above= xyz (should be different)

.. any clues?
User avatar
jimibt
Posts: 3641
Joined: Mon Nov 30, 2015 6:42 pm
Location: Narnia

Korattt wrote:
Tue Mar 23, 2021 11:06 am
not sure if I’ve found a bug or not but working out two sets of averages as a stored value with using identical stored values doesn’t work, 2nd stored value as an average displays the same average as the 1st stored value

i.e.

SV’s

xxx1
xxx2

SV average of the two above = xyz

SV’s

xxx1 (as above)
xxx2 (as above)
xxx3

SV average of the three above= xyz (should be different)

.. any clues?
assuming they all have different values, then yes, the average should be different between the 2 comparisons. however, if you were to use the same values for xxx1/2 and 3, then of course, the average would be the same.

i'm sure you're not doing this -but just wanted to clarify ;)
Korattt
Posts: 2405
Joined: Mon Dec 21, 2015 6:46 pm

thanks Jim, think I’ve sorted it, I really am a bit dense with this sort of stuff
Korattt
Posts: 2405
Joined: Mon Dec 21, 2015 6:46 pm

think I’ve been a bit thick & stupid here, how embarrassing :oops:
noseve
Posts: 10
Joined: Sat Feb 27, 2021 11:06 am

Calling this version 1.56 doesn't really do it justice. The Guardian custom columns alone - eliminating the need to endlessly fly between logs - are enough to warrant calling it version 2.0. Thanks.
verance
Posts: 83
Joined: Wed Nov 11, 2020 10:59 am

I'm using the custom ranking of selections on a stored value.

If 2 or more selections have the same stored values, it seems to default to the market row index number?

Any way around this? Ideally, I'd like all ties to be given the lowest rank of that set.
Archery1969
Posts: 3193
Joined: Thu Oct 24, 2019 8:25 am
Location: Newport

Hi,

When you select either one of the following prices in the parameters tab then they are not shown in the description column ?

Reverse market price
2nd best reverse market price
3rd best reverse market price

Thanks,
You do not have the required permissions to view the files attached to this post.
verance
Posts: 83
Joined: Wed Nov 11, 2020 10:59 am

Hi, I have a rounding issue with my stored values when I set to round to nearest whole number.

If the answer is 2.5 it gets rounded down to 2, instead of 3. Example below
RoundingIssue.png
If the answer is 3.5 it does correctly round up to 4.
You do not have the required permissions to view the files attached to this post.
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Archery1969 wrote:
Sat Apr 24, 2021 10:13 pm
Hi,

When you select either one of the following prices in the parameters tab then they are not shown in the description column ?

Reverse market price
2nd best reverse market price
3rd best reverse market price

Thanks,
Its working fine when I just checked it
Capture.JPG

Is it always missing for you?
ie, have you tried creating a new rule from scratch to see if it happens?
Just in case its something occurring after editing a certain parameter etc that could be recreated and fixed

Also is everything else displaying OK ie, all your other menus in the rules editor
Your Windows font scaling being set to high can cause parts of Bet Angel not to display fully/correctly
You do not have the required permissions to view the files attached to this post.
Archery1969
Posts: 3193
Joined: Thu Oct 24, 2019 8:25 am
Location: Newport

Dallas wrote:
Sun Apr 25, 2021 11:42 am
Archery1969 wrote:
Sat Apr 24, 2021 10:13 pm
Hi,

When you select either one of the following prices in the parameters tab then they are not shown in the description column ?

Reverse market price
2nd best reverse market price
3rd best reverse market price

Thanks,
Its working fine when I just checked it

Capture.JPG


Is it always missing for you?
ie, have you tried creating a new rule from scratch to see if it happens?
Just in case its something occurring after editing a certain parameter etc that could be recreated and fixed

Also is everything else displaying OK ie, all your other menus in the rules editor
Your Windows font scaling being set to high can cause parts of Bet Angel not to display fully/correctly
Hi Dallas,

It’s when you select REVERSE prices.

Thanks,
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

verance wrote:
Sun Apr 25, 2021 10:30 am
Hi, I have a rounding issue with my stored values when I set to round to nearest whole number.

If the answer is 2.5 it gets rounded down to 2, instead of 3. Example below

RoundingIssue.png

If the answer is 3.5 it does correctly round up to 4.
I'll also ask them to check this, it may be tomorrow before they reply just depends who's around
Hi Dallas,
Post Reply

Return to “Bet Angel - Release & version history”