Back or Lay the 1st to Score Guardian Automation Bot

xylophone
Posts: 2
Joined: Thu Jul 23, 2020 7:33 pm

Yes i was selecting the teams for the game this morning just for a trail again in full operational mode and i watched it during the whole game incase there were any mishaps , i selected the home team in automated nominated selection 1 and the away team in automated nominated selection 2, i chose wellington in 1 and phoenix in 2. I didnt try and change anything it was directly set up from the fresh download. i went into the automation tab next to the log at the foot of the page and it was giving the name of the rule that was being used in the game.
I have tried it with only one team selected in automation nominated 1 and the same as in 2 i have tried it with both teams etc. So im at a loss as it doesnt seem to be triggering any reaction. I have copied the file and tried it in another rule too and still nothing. any help would be greatly sppreciated
Jasonffc1
Posts: 75
Joined: Sun Mar 22, 2020 10:16 am

Hi Dallas,

Wondered if you could help me. I am looking to lay the nominated team if they go 1-0 up but only if they score between 10mins and 35mins.If no goal is scored in that time frame I don’t want nothing to trigger. If it goes 2-0 I will take the loss straight away and if goes back to 1-1 I will green up all selections. If it stays 1-0 to the nominated team at HT I will take the loss too.

Thanks
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Jasonffc1 wrote:
Mon Nov 15, 2021 10:05 am
Hi Dallas,

Wondered if you could help me. I am looking to lay the nominated team if they go 1-0 up but only if they score between 10mins and 35mins.If no goal is scored in that time frame I don’t want nothing to trigger. If it goes 2-0 I will take the loss straight away and if goes back to 1-1 I will green up all selections. If it stays 1-0 to the nominated team at HT I will take the loss too.

Thanks
To satisfy the time element you'd need to use two 'Set/modify signal' rules

one of the rules needs to be armed 0-10mins the other 10-35mins

with each setting a different signal name
ie, 'abort' and 'trigger'

both with the following conditions;

Historical Relative Odds Cond
Selections back price now
is less than selections back price 65 secs ago
minus 15 ticks

Time Since unsuspended Cond
Is greater than 60secs

on the second of the two rules you'll also need a

Signal set cond
to test the signal named 'abort'
is NOT set with a value


Then on your lay bet rule you just need a

Signal Set Cond
to test the signal named 'trigger'
is set with a value

For the green up part you'll need 2 green up rules
one armed for HT

the other will need two historical relative odds conditions nested in a group were one or more of them must be true
When setting up the historical Relative odds conditions one would need to test for

Selections back price now
is less than selections back price 65 secs ago
minus 15 ticks

the other

Selections back price now
is greater than selections back price 65 secs ago
plus 15 ticks

Finally outside that group of conditions add a

Time Since unsuspended Cond
Is greater than 60secs


Sounds complicated but if you go through it step by step like that it'll be fairly easy to set up
Jasonffc1
Posts: 75
Joined: Sun Mar 22, 2020 10:16 am

Thanks Dallas, does look a bit complicated but I will give it a go.

Cheers
Jasonffc1
Posts: 75
Joined: Sun Mar 22, 2020 10:16 am

Dallas wrote:
Mon Nov 15, 2021 10:30 am
Jasonffc1 wrote:
Mon Nov 15, 2021 10:05 am
Hi Dallas,

Wondered if you could help me. I am looking to lay the nominated team if they go 1-0 up but only if they score between 10mins and 35mins.If no goal is scored in that time frame I don’t want nothing to trigger. If it goes 2-0 I will take the loss straight away and if goes back to 1-1 I will green up all selections. If it stays 1-0 to the nominated team at HT I will take the loss too.

Thanks
To satisfy the time element you'd need to use two 'Set/modify signal' rules

one of the rules needs to be armed 0-10mins the other 10-35mins

with each setting a different signal name
ie, 'abort' and 'trigger'

both with the following conditions;

Historical Relative Odds Cond
Selections back price now
is less than selections back price 65 secs ago
minus 15 ticks

Time Since unsuspended Cond
Is greater than 60secs

on the second of the two rules you'll also need a

Signal set cond
to test the signal named 'abort'
is NOT set with a value


Then on your lay bet rule you just need a

Signal Set Cond
to test the signal named 'trigger'
is set with a value

For the green up part you'll need 2 green up rules
one armed for HT

the other will need two historical relative odds conditions nested in a group were one or more of them must be true
When setting up the historical Relative odds conditions one would need to test for

Selections back price now
is less than selections back price 65 secs ago
minus 15 ticks

the other

Selections back price now
is greater than selections back price 65 secs ago
plus 15 ticks

Finally outside that group of conditions add a

Time Since unsuspended Cond
Is greater than 60secs


Sounds complicated but if you go through it step by step like that it'll be fairly easy to set up
I have given it a go, could you please check the file attached to see if done correctly.

Thanks
You do not have the required permissions to view the files attached to this post.
Jasonffc1
Posts: 75
Joined: Sun Mar 22, 2020 10:16 am

Dallas wrote:
Mon Nov 15, 2021 10:30 am
Jasonffc1 wrote:
Mon Nov 15, 2021 10:05 am
Hi Dallas,

Wondered if you could help me. I am looking to lay the nominated team if they go 1-0 up but only if they score between 10mins and 35mins.If no goal is scored in that time frame I don’t want nothing to trigger. If it goes 2-0 I will take the loss straight away and if goes back to 1-1 I will green up all selections. If it stays 1-0 to the nominated team at HT I will take the loss too.

Thanks
To satisfy the time element you'd need to use two 'Set/modify signal' rules

one of the rules needs to be armed 0-10mins the other 10-35mins

with each setting a different signal name
ie, 'abort' and 'trigger'

both with the following conditions;

Historical Relative Odds Cond
Selections back price now
is less than selections back price 65 secs ago
minus 15 ticks

Time Since unsuspended Cond
Is greater than 60secs

on the second of the two rules you'll also need a

Signal set cond
to test the signal named 'abort'
is NOT set with a value


Then on your lay bet rule you just need a

Signal Set Cond
to test the signal named 'trigger'
is set with a value

For the green up part you'll need 2 green up rules
one armed for HT

the other will need two historical relative odds conditions nested in a group were one or more of them must be true
When setting up the historical Relative odds conditions one would need to test for

Selections back price now
is less than selections back price 65 secs ago
minus 15 ticks

the other

Selections back price now
is greater than selections back price 65 secs ago
plus 15 ticks

Finally outside that group of conditions add a

Time Since unsuspended Cond
Is greater than 60secs


Sounds complicated but if you go through it step by step like that it'll be fairly easy to set up
Hi Dallas,

I tested it on a couple of games tonight and a goal went in on 3rd minute but my abort signal didnt trigger, I guess it was meant to. Could you please look at message I sent with the file attached and see if I set up correctly. Would be much appreciated

Thanks
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Jasonffc1 wrote:
Mon Nov 15, 2021 7:15 pm
Dallas wrote:
Mon Nov 15, 2021 10:30 am
Jasonffc1 wrote:
Mon Nov 15, 2021 10:05 am
Hi Dallas,

Wondered if you could help me. I am looking to lay the nominated team if they go 1-0 up but only if they score between 10mins and 35mins.If no goal is scored in that time frame I don’t want nothing to trigger. If it goes 2-0 I will take the loss straight away and if goes back to 1-1 I will green up all selections. If it stays 1-0 to the nominated team at HT I will take the loss too.

Thanks
To satisfy the time element you'd need to use two 'Set/modify signal' rules

one of the rules needs to be armed 0-10mins the other 10-35mins

with each setting a different signal name
ie, 'abort' and 'trigger'

both with the following conditions;

Historical Relative Odds Cond
Selections back price now
is less than selections back price 65 secs ago
minus 15 ticks

Time Since unsuspended Cond
Is greater than 60secs

on the second of the two rules you'll also need a

Signal set cond
to test the signal named 'abort'
is NOT set with a value


Then on your lay bet rule you just need a

Signal Set Cond
to test the signal named 'trigger'
is set with a value

For the green up part you'll need 2 green up rules
one armed for HT

the other will need two historical relative odds conditions nested in a group were one or more of them must be true
When setting up the historical Relative odds conditions one would need to test for

Selections back price now
is less than selections back price 65 secs ago
minus 15 ticks

the other

Selections back price now
is greater than selections back price 65 secs ago
plus 15 ticks

Finally outside that group of conditions add a

Time Since unsuspended Cond
Is greater than 60secs


Sounds complicated but if you go through it step by step like that it'll be fairly easy to set up
Hi Dallas,

I tested it on a couple of games tonight and a goal went in on 3rd minute but my abort signal didnt trigger, I guess it was meant to. Could you please look at message I sent with the file attached and see if I set up correctly. Would be much appreciated

Thanks

Its was very close, only 2 small bits missing

1, the green goal needs the profit conditions nesting a in group with only one of them needing to be true as shown below
Group.JPG

2, there was no signal names on either the trigger or abort signal rules, i've done the trigger on below, just copy that then do the same for the abort signal (i've enabled logging so that if anything doesn't work we can at least see if the signal is setting correctly or not so it always helps with debugging when 1st setting up)
Signal.JPG

Apart from those everything else is spot on so it should be good to go - always still test in PM for a few games before using it on a live market to ensure all rules are triggering correctly
You do not have the required permissions to view the files attached to this post.
Jasonffc1
Posts: 75
Joined: Sun Mar 22, 2020 10:16 am

Thanks very much Dallas, will get that updated and test it tonight.

Cheers
Jasonffc1
Posts: 75
Joined: Sun Mar 22, 2020 10:16 am

Dallas wrote:
Tue Nov 16, 2021 2:07 pm
Jasonffc1 wrote:
Mon Nov 15, 2021 7:15 pm
Dallas wrote:
Mon Nov 15, 2021 10:30 am


To satisfy the time element you'd need to use two 'Set/modify signal' rules

one of the rules needs to be armed 0-10mins the other 10-35mins

with each setting a different signal name
ie, 'abort' and 'trigger'

both with the following conditions;

Historical Relative Odds Cond
Selections back price now
is less than selections back price 65 secs ago
minus 15 ticks

Time Since unsuspended Cond
Is greater than 60secs

on the second of the two rules you'll also need a

Signal set cond
to test the signal named 'abort'
is NOT set with a value


Then on your lay bet rule you just need a

Signal Set Cond
to test the signal named 'trigger'
is set with a value

For the green up part you'll need 2 green up rules
one armed for HT

the other will need two historical relative odds conditions nested in a group were one or more of them must be true
When setting up the historical Relative odds conditions one would need to test for

Selections back price now
is less than selections back price 65 secs ago
minus 15 ticks

the other

Selections back price now
is greater than selections back price 65 secs ago
plus 15 ticks

Finally outside that group of conditions add a

Time Since unsuspended Cond
Is greater than 60secs


Sounds complicated but if you go through it step by step like that it'll be fairly easy to set up
Hi Dallas,

I tested it on a couple of games tonight and a goal went in on 3rd minute but my abort signal didnt trigger, I guess it was meant to. Could you please look at message I sent with the file attached and see if I set up correctly. Would be much appreciated

Thanks

Its was very close, only 2 small bits missing

1, the green goal needs the profit conditions nesting a in group with only one of them needing to be true as shown below

Group.JPG


2, there was no signal names on either the trigger or abort signal rules, i've done the trigger on below, just copy that then do the same for the abort signal (i've enabled logging so that if anything doesn't work we can at least see if the signal is setting correctly or not so it always helps with debugging when 1st setting up)

Signal.JPG


Apart from those everything else is spot on so it should be good to go - always still test in PM for a few games before using it on a live market to ensure all rules are triggering correctly
I just had it applied to the South Korea game and a goal was scored in the time frame but only green goal triggered not the trigger rule?
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

What did the log show regarding the signal rules?
Jasonffc1
Posts: 75
Joined: Sun Mar 22, 2020 10:16 am

I had it running with another automation which was storing history list, so didn’t show on the log. Are the times right that I have set up. The green goal and red ht both triggered but the rest nothing happened
Jasonffc1
Posts: 75
Joined: Sun Mar 22, 2020 10:16 am

Dallas wrote:
Wed Nov 17, 2021 11:36 am
What did the log show regarding the signal rules?
just had it set it up for Stockport v Bolton game, Bolton scored inside 5 mins so abort should have been triggered. got this in this logs
You do not have the required permissions to view the files attached to this post.
Jasonffc1
Posts: 75
Joined: Sun Mar 22, 2020 10:16 am

Any ideas Dallas why it’s not triggering?

Thanks
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Jasonffc1 wrote:
Fri Nov 19, 2021 9:18 am
Any ideas Dallas why it’s not triggering?

Thanks
Just had another quick look at your file and something I missed the first time around on the abort and trigger rules is you've set them both to test;

the price 65 secs ago
against
the price 65 secs ago

For both this should be
the price now
against
the price 65 secs ago
Jasonffc1
Posts: 75
Joined: Sun Mar 22, 2020 10:16 am

Thanks Dallas have adjusted it now. Will give it a go tonight, hopefully works this time
Post Reply

Return to “Bet Angel Automation - Football”