Lay the Draw @ Half Time if 0-0 Guardian Automation Bot

Post Reply
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

aceporty wrote:
Wed Aug 14, 2019 12:51 pm
Couple of questions regarding this automation and LTD@HT in general.

Does this automation still work in high liquidity markets £30,000 and above ?

Does anyone have a shared automation that I could download for 1-1 @HT ?

Regards,

ACE
The higher the liquidity and fewer price gaps the better it works
You could use signals to find 1-1 score lines, if doing that I'd use the regular LTD rule then add the goal signals rules to it
viewtopic.php?f=50&t=11309
viewtopic.php?f=50&t=12490
T84UK
Posts: 3
Joined: Fri Aug 16, 2019 9:10 am

I'm modifying this bot to my own settings however I'm wondering if someone could help with one thing. I would like the Bot to check the match liquidity before kickoff. I would like to set it so it only takes into account matches that have at least 20k of bets matched. I have found the bot to be quite unpredictable on the lesser known games. I had a couple of games the other day where the bot layed the draw when the scores were 1-1 and also layed a game which was 0-2 at half time.
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

T84UK wrote:
Tue Aug 20, 2019 6:58 pm
I'm modifying this bot to my own settings however I'm wondering if someone could help with one thing. I would like the Bot to check the match liquidity before kickoff. I would like to set it so it only takes into account matches that have at least 20k of bets matched. I have found the bot to be quite unpredictable on the lesser known games. I had a couple of games the other day where the bot layed the draw when the scores were 1-1 and also layed a game which was 0-2 at half time.
If you add a 'Set/Modify Signal' rule armed for a few seconds before KO then on the signal tab set a signal on the market (give it whatever name you want)
Then on the conditions tab add a volume condition

Basically, if the volume is greater than £X then a signal gets set on the market

Finally on the existing lay bet rule add a 'Signal Set' Condition
Is the signal named (whatever you called it)
Set with a value

So the lay bet triggers if a signal is set, and the signal is set if the volume is greater than £X
T84UK
Posts: 3
Joined: Fri Aug 16, 2019 9:10 am

Thanks for your help. Ill give this a go.
smiffy042
Posts: 1
Joined: Sun Sep 01, 2019 5:01 pm

Hi guys, I'm new here so go lightly on me. :D
I'm wondering if somebody could point me in the right direction. I'd like to automate laying the current correct score or backing overs for +1 goal at half time. For example - man u 2-0 Southampton at ht - I want to either back over 2.5 or lay 2-0 at ht.

Any help would be much appreciated
Thanks
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

smiffy042 wrote:
Sat Sep 07, 2019 9:31 pm
Hi guys, I'm new here so go lightly on me. :D
I'm wondering if somebody could point me in the right direction. I'd like to automate laying the current correct score or backing overs for +1 goal at half time. For example - man u 2-0 Southampton at ht - I want to either back over 2.5 or lay 2-0 at ht.

Any help would be much appreciated
Thanks
If you check the prices at HT of the next O/U goals market you'll find they'll fall within a certain odds range.

You'll then just need a lay bet rule with 2 x fixed odds condition to create a odds range for your lay to trigger (see the example below on creating a range)
viewtopic.php?f=47&t=17622
stumpyfingers
Posts: 3
Joined: Wed Nov 06, 2019 6:55 pm

Hi all, i am sorry if i have posted this in the wrong place or if it has already been asked.

I am looking to lay the draw @ half time if 0-0 and back 1-1 i would then like to green up when the score is 2-1.

I am a complete newbie and any help would be much appreciated :D
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

stumpyfingers wrote:
Sat Nov 09, 2019 9:36 am
Hi all, i am sorry if i have posted this in the wrong place or if it has already been asked.

I am looking to lay the draw @ half time if 0-0 and back 1-1 i would then like to green up when the score is 2-1.

I am a complete newbie and any help would be much appreciated :D
You can certainly use this rule as your starting point, you'd then need to go onto the Stored value tab and store a value on the event
(you can use use the value of 1 as your entered amount)

Next you'd need a whole new automation file to apply to the CS market with a 'Place lay bet' rule and a stored value condition to test for the stroed value for the event from above

Which market is it you then want to green up at 2-1 is it just the CS or both?
It is quiet an advanced thing to set up if your new to automation so you may need to post back if you get stuck
stumpyfingers
Posts: 3
Joined: Wed Nov 06, 2019 6:55 pm

Hi, thank you.

I think i understand what your saying. I will give it a try and test in practice mode wish me luck.
stumpyfingers
Posts: 3
Joined: Wed Nov 06, 2019 6:55 pm

Also it would be the Lay the draw (match odds) market that would green up at 2-1 or 1-2. The back bet would just run till the end of the match obviously winning if the score is 1-1
jtrader
Posts: 100
Joined: Thu Feb 09, 2017 11:35 am

Hello! I have some questions about some .baf files I could try to modify for that strat - If it's 0-0 HT, Lay Under 2.5 when lay odds steamed to 1.26,and if no goal is scored Lay Draw when draw odds steamed to 2.If there is a goal before Lay Draw is matched,then greening all.If there are 2 goals after Lay Draw is matched - if 1-1 - greening all (these 2 markets-match odds and O/U2.5; if 2-0/0-2 - doing nothing). But these 2 files not working at all. Laying Under 2.5 only lay that,but if there is a goal,nothing happens and not greening. Lay Draw file doesn't run too and if Lay Under 2.5 is matched and no goal is scored,it's not laying draw at all when draw odds are reached 2.If anyone could point where are my mistakes at these .baf files?
You do not have the required permissions to view the files attached to this post.
dustybearuk
Posts: 4
Joined: Sat Jun 01, 2019 5:09 pm

3 times now this hasnt greened up for me, any ideas what could be causing this?
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

dustybearuk wrote:
Sun Dec 22, 2019 2:01 pm
3 times now this hasnt greened up for me, any ideas what could be causing this?
The first place to check is the markets are being refreshed fast enough
viewtopic.php?f=37&t=11491
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

jtrader wrote:
Thu Nov 21, 2019 12:27 pm
Hello! I have some questions about some .baf files I could try to modify for that strat - If it's 0-0 HT, Lay Under 2.5 when lay odds steamed to 1.26,and if no goal is scored Lay Draw when draw odds steamed to 2.If there is a goal before Lay Draw is matched,then greening all.If there are 2 goals after Lay Draw is matched - if 1-1 - greening all (these 2 markets-match odds and O/U2.5; if 2-0/0-2 - doing nothing). But these 2 files not working at all. Laying Under 2.5 only lay that,but if there is a goal,nothing happens and not greening. Lay Draw file doesn't run too and if Lay Under 2.5 is matched and no goal is scored,it's not laying draw at all when draw odds are reached 2.If anyone could point where are my mistakes at these .baf files?
Sorry I must have missed this one, if you still need help with it post a quick message and i'll take a look
jtrader
Posts: 100
Joined: Thu Feb 09, 2017 11:35 am

Dallas wrote:
Sun Dec 22, 2019 6:24 pm
jtrader wrote:
Thu Nov 21, 2019 12:27 pm
Hello! I have some questions about some .baf files I could try to modify for that strat - If it's 0-0 HT, Lay Under 2.5 when lay odds steamed to 1.26,and if no goal is scored Lay Draw when draw odds steamed to 2.If there is a goal before Lay Draw is matched,then greening all.If there are 2 goals after Lay Draw is matched - if 1-1 - greening all (these 2 markets-match odds and O/U2.5; if 2-0/0-2 - doing nothing). But these 2 files not working at all. Laying Under 2.5 only lay that,but if there is a goal,nothing happens and not greening. Lay Draw file doesn't run too and if Lay Under 2.5 is matched and no goal is scored,it's not laying draw at all when draw odds are reached 2.If anyone could point where are my mistakes at these .baf files?
Sorry I must have missed this one, if you still need help with it post a quick message and i'll take a look
Still need your help,Dallas! Thanks if you could take a look on these .baf files!
Post Reply

Return to “Bet Angel Automation - Football”