Back or Lay at a Percentage of BSP Guardian Automation Bot

Anbell
Posts: 2004
Joined: Fri Apr 05, 2019 2:31 am

airtomoreira wrote:
Wed Jan 27, 2021 6:46 am
But if I did that, then surely my bet would not be placed until (in my example) the price was 99% less than the BSP (so if the BSP was 10, the bet wouldn't be placed until the price was 1.05). I want to place the bet, as per the Automation rule, at 50% of BSP, (5) - but if my bet at 5 isn't accepted because the odds have reduced below 5 in the short time that it takes my bet to reach the market, I want to accept the best market price that is available, which is, in the vast majority of instances, going to be somewhere in the region of between 4 and 4.9, unless something very significant happens at the very same time, for example the long odds on favourite falls
You are correct. My mistake. Sorry.

You'd need to put in the 2nd bet at 101
airtomoreira
Posts: 18
Joined: Wed Apr 29, 2009 1:17 pm

What second bet? I only want to place one bet, so that it gets matched as near as possible to 5 (in the above example)
jtrader
Posts: 100
Joined: Thu Feb 09, 2017 11:35 am

airtomoreira wrote:
Wed Jan 27, 2021 1:44 pm
What second bet? I only want to place one bet, so that it gets matched as near as possible to 5 (in the above example)
You need to set refresh interval = 20ms,change in "Stored Values" in "Store Back BSP" rule Amount = 50% and change in "Parameters" in "Back at Percentage of BSP" rule 50% instead of 60% and you have needed .baf file I think.
Back at 60% Lower than BSP.baf
You do not have the required permissions to view the files attached to this post.
Atho55
Posts: 637
Joined: Tue Oct 06, 2015 1:37 pm
Location: Home of Triumph Motorcycles

I think there might be 2 potential solutions to this.

Solution 1. Create further SV`s with different %`s keeping the SV trigger name the same. Then add Matched & Unmatched bets =0

Solution 2. Create a Condition group that has varying %`s within it rather than use the SV.

The screenshot shows both solutions I hope.

Back @ 50% BSP.jpg
You do not have the required permissions to view the files attached to this post.
JamesMu
Posts: 6
Joined: Tue Aug 10, 2021 3:33 pm

Hi, I'm very new to this and have a few stupid questions. I'm wanting to lay ANY horse that goes 50 percent of the BSP in the first furlong or so of a race. is it possible to do this?
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

JamesMu wrote:
Tue Aug 10, 2021 3:52 pm
Hi, I'm very new to this and have a few stupid questions. I'm wanting to lay ANY horse that goes 50 percent of the BSP in the first furlong or so of a race. is it possible to do this?
You can do that with file, there's no way to tell where a horse is on the course, but it takes approx 10-15secs to run the 1st furlong depending on the race length so you could just arm your rule till around 00:00:13 after going in-play
JamesMu
Posts: 6
Joined: Tue Aug 10, 2021 3:33 pm

thank you for the reply, is there a simple 'Lay at 40 percent less in the first 15 seconds of a race' set up anywhere? I am very new to this and struggling to get my head around everything at the moment. If it would be possible to send me it if so id really appreciate that.
DalS
Posts: 7
Joined: Tue Jan 07, 2020 11:30 am

Hi Dallas, can you please check that this file is as you described, I dont think it has the same parameters? And I am not good enough to change them yet. Thanks
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

DalS wrote:
Sat Sep 25, 2021 10:24 am
Hi Dallas, can you please check that this file is as you described, I dont think it has the same parameters? And I am not good enough to change them yet. Thanks
The parameters are correct as per opening post;

Back Rule places at - Custom % below actual SP 50%
Lay Rule places at - Custom % above actual SP 100%
DalS
Posts: 7
Joined: Tue Jan 07, 2020 11:30 am

Thanks for checking, I can see where I got confused.
Can you tell me, if I were to lay at % of sp on a selection, but no greater than say 15 sp, what I would need to add/change.
Thanks
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

DalS wrote:
Fri Oct 01, 2021 9:43 am
Thanks for checking, I can see where I got confused.
Can you tell me, if I were to lay at % of sp on a selection, but no greater than say 15 sp, what I would need to add/change.
Thanks
You'll just need a 'Fixed Odds Condition' to test the lay price is less than 15 (or whatever you it it to be)
andyyorks
Posts: 1
Joined: Sat Aug 20, 2016 11:03 am

Dallas wrote:
Sat Dec 29, 2018 11:24 am
teambulldog wrote:
Sat Dec 29, 2018 10:40 am
Hi Dallas,
Could you help please ?Am liking this a lot for laying but is there a way to get more LAY bets MATCHED as a lot of times the price moves out quick and leaves with unmatched bets ???
Would fixed stake help as i am still laying to liability, AM on vps and running at 20ms
hope you have some ideas please?
thanks
Julian
On the Parameters tab you can change where the bet is placed at, so you can place the bet outside the price, ie instead of placing at 100% place at 110%, that will increase the chances of it being matched
Hi Dallas
I've just found this automation rule and I'm having the same problem as teambulldog, lots of lay bets not getting matched.
How do you do what you said on the parameters tab? Can't work out what to do.
Do you mean that the percentage needs to be changed from 100% to 110% when the stored value is being set up?
Thanks
durango
Posts: 44
Joined: Mon Oct 03, 2011 12:37 pm

Hi Dallas,
How do i stop this from happening ?


26/11/2021 18:34:41: Guardian has detected that the market is suspended
26/11/2021 18:34:42: Guardian has detected that the market is in-play
26/11/2021 18:34:43: [G_Auto 1] : Store Value (Shared) for Brostaigh: SPdrift = 1.334 + 55% = 2.067
26/11/2021 18:34:43: Guardian has detected that the market is now unsuspended
26/11/2021 18:35:42: [G_Auto 1] : £ 7.50 Lay bet placed on Brostaigh at 9. Entirely unmatched when it initially reached the market. Ref: 10027 ( Fill or kill bet with 3 seconds delay. )
26/11/2021 18:35:45: [G_Auto 1] : £ 7.5 of unmatched bet (Ref:10027) was filled before remainder was killed.
26/11/2021 18:35:54: Guardian has detected that the market is suspended

of course it went on to win and turned into a large loss ...in paper mode luckily
User avatar
Dallas
Posts: 22671
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

durango wrote:
Fri Nov 26, 2021 7:48 pm
Hi Dallas,
How do i stop this from happening ?


26/11/2021 18:34:41: Guardian has detected that the market is suspended
26/11/2021 18:34:42: Guardian has detected that the market is in-play
26/11/2021 18:34:43: [G_Auto 1] : Store Value (Shared) for Brostaigh: SPdrift = 1.334 + 55% = 2.067
26/11/2021 18:34:43: Guardian has detected that the market is now unsuspended
26/11/2021 18:35:42: [G_Auto 1] : £ 7.50 Lay bet placed on Brostaigh at 9. Entirely unmatched when it initially reached the market. Ref: 10027 ( Fill or kill bet with 3 seconds delay. )
26/11/2021 18:35:45: [G_Auto 1] : £ 7.5 of unmatched bet (Ref:10027) was filled before remainder was killed.
26/11/2021 18:35:54: Guardian has detected that the market is suspended

of course it went on to win and turned into a large loss ...in paper mode luckily
Do you mean hoe can you exit the trade if it begins to go against you?
durango
Posts: 44
Joined: Mon Oct 03, 2011 12:37 pm

The lay bet should kick in at 2.067, I believe, but it actually layed at a far bigger price ..is there a way of stopping the lay from laying at a far bigger price ..in this case it was layed at 9. which was way larger ?
Post Reply

Return to “Bet Angel Automation - Horse racing - In-running”