Trade the LTP Crossing over the VWAP Guardian Automation Bot

User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

tootatoota wrote:
Fri Jul 17, 2020 4:30 am
Hi,
I thought i had this sorted but having trouble trying to insert VWAP checkpoint into a simple BOT.
3 different checkpoints say -15min,-10min,-5min
If fav for ex steams in Back.
I am getting all confused and probably trying too hard
Any help gratefully accepted(rule names and signals are ???????????????)
Regards Tooota
There is a rule called 'Checkpoint VWAP'
if you just arm this to trigger at the times you want that will reset the VWAP from that point
if doing it in 5 mins blocks you would just need the 1 rule armed at 00:15:00 before start
Trigger 3 times
Rearm every 300 secs
User avatar
tootatoota
Posts: 56
Joined: Fri Apr 17, 2020 2:33 am

Thanks
CrunchyTwiglet
Posts: 16
Joined: Thu Mar 21, 2019 4:46 pm

Hi Dallas,
Newbie so excuse the dumb questions. I am trying to modify the automation for my own purposes but there is two things that I need explaining. The first is that there is a criteria on the back and lay bets "Place bet triggers on the selection = 0". What does this mean? / What does this do? The second is I wanted to fire for any selection. Is it as simple as choosing "Any Selection" for each of the rules?
Thanking you for your time.
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

CrunchyTwiglet wrote:
Sun Nov 08, 2020 8:56 pm
Hi Dallas,
Newbie so excuse the dumb questions. I am trying to modify the automation for my own purposes but there is two things that I need explaining. The first is that there is a criteria on the back and lay bets "Place bet triggers on the selection = 0". What does this mean? / What does this do? The second is I wanted to fire for any selection. Is it as simple as choosing "Any Selection" for each of the rules?
Thanking you for your time.
The "Place bet triggers on the selection = 0" prevents it triggering more than once on a selection

Rather than use 'ANY' selection, the better option would be to use 'EVERY selection'
Which ever you choose you might then want to add a 'fixed odds condition' to test the price is less than 'X', just to stop it triggering on the big outsiders
CrunchyTwiglet
Posts: 16
Joined: Thu Mar 21, 2019 4:46 pm

Thanks for your quick response Dallas, I appreciate your time. I'll try those edits tomorrow in practice.
Cheers. :)
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

CrunchyTwiglet wrote:
Sun Nov 08, 2020 9:33 pm
Thanks for your quick response Dallas, I appreciate your time. I'll try those edits tomorrow in practice.
Cheers. :)

Image
User avatar
MobiusGrey
Posts: 289
Joined: Fri Nov 23, 2018 8:10 pm

Ok I think I've royally ballsed this up. Just wondering if someone can point me in the right direction please (.baf attached)

Effectively I'm looking to place a back if the price drops 5% below the VWAP so if the price is at 4.0 and suddenly drops lower by 5% it will place a back bet and green up when the price is back at VWAP, and vice versa for lays.

I'm just not sure where I'm going wrong?
You do not have the required permissions to view the files attached to this post.
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

MobiusGrey wrote:
Tue Apr 26, 2022 6:36 pm
Ok I think I've royally ballsed this up. Just wondering if someone can point me in the right direction please (.baf attached)

Effectively I'm looking to place a back if the price drops 5% below the VWAP so if the price is at 4.0 and suddenly drops lower by 5% it will place a back bet and green up when the price is back at VWAP, and vice versa for lays.

I'm just not sure where I'm going wrong?
I won't be able to check the actual file until the morning, but to edit the original file in the OP all that should need to be done is on the stored value for the VWAP to use the 'Adjustment' minus 5%
User avatar
MobiusGrey
Posts: 289
Joined: Fri Nov 23, 2018 8:10 pm

Dallas wrote:
Tue Apr 26, 2022 6:54 pm
MobiusGrey wrote:
Tue Apr 26, 2022 6:36 pm
Ok I think I've royally ballsed this up. Just wondering if someone can point me in the right direction please (.baf attached)

Effectively I'm looking to place a back if the price drops 5% below the VWAP so if the price is at 4.0 and suddenly drops lower by 5% it will place a back bet and green up when the price is back at VWAP, and vice versa for lays.

I'm just not sure where I'm going wrong?
I won't be able to check the actual file until the morning, but to edit the original file in the OP all that should need to be done is on the stored value for the VWAP to use the 'Adjustment' minus 5%
Ah thanks Dallas, this makes sense, I was trying to over complicate things I think by adjusting the signal values too. Pretty sure this solves it.
friendy63
Posts: 4
Joined: Sun Jul 16, 2017 11:14 am

Hi Dallas
Been using this lately but i want to put more than one trade in the market at different prices so have copied the back and lay bet rules and added different price points but it still only puts the one bet in the market.Any ideas in what i am missing doing.
Thanks Ian.
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

friendy63 wrote:
Thu Jun 16, 2022 5:03 pm
Hi Dallas
Been using this lately but i want to put more than one trade in the market at different prices so have copied the back and lay bet rules and added different price points but it still only puts the one bet in the market.Any ideas in what i am missing doing.
Thanks Ian.
Do you mean bet on different selections in the market or put additions bets on the same selection?

If the same selection are they still to be triggered when the LTP crosses the VWAP or will these use there own conditions for triggering?
friendy63
Posts: 4
Joined: Sun Jul 16, 2017 11:14 am

Hi Dallas
all bets to be on same selection & still to be triggered when ltp crosses vwap.
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

friendy63 wrote:
Fri Jun 17, 2022 12:42 pm
Hi Dallas
all bets to be on same selection & still to be triggered when ltp crosses vwap.
If you remove the 'Number of place bet triggers condition' from the back and lay bet rules and then duplicate them that should be all that's needed
The back/lay rules are only armed to trigger one time each anyway so the number of place bet triggers condition was only ever added as a extra safety

Run it in PM till you are sure its working right just in case anything further is needed
Digby3192
Posts: 14
Joined: Tue Jun 08, 2021 12:24 pm

G'day all,

How can I update this so it places a back bet if the LTP is 3% greater than the VWAP and a lay bet if the LTP is 3% less that the VWAP from 5 mins out and automatically green up before the jump?

Any help would be much appreciated!
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Digby3192 wrote:
Sat Sep 09, 2023 2:55 am
G'day all,

How can I update this so it places a back bet if the LTP is 3% greater than the VWAP and a lay bet if the LTP is 3% less that the VWAP from 5 mins out and automatically green up before the jump?

Any help would be much appreciated!
On the Stored value tab of the first rule add a stored value to store the LTP book % of a selection (similar to the existing back & lay stored values, these can then be removed if you want)

Then on the conditions tab of the two signal rules and the back and lay bet rules swap the back% and lay% stored value names for your LTP stored value you've just added
Post Reply

Return to “Bet Angel Automation - Horse racing - Pre off”