Close Trade If In Loss Over 10 Secs Guardian Automation Bot

Post Reply
DaveJessop
Posts: 37
Joined: Mon Jan 15, 2018 10:55 am

Thanks mate - changed the rearm to 2 seconds on the stop loss - I also have it set to close trade on selection with greening on position 3 (fixed order by favouritism before the lay bet and the lay is position 3)

As long as the stop loss catches the majority of losers and not run to a full loss I'll be happy :)
DaveJessop
Posts: 37
Joined: Mon Jan 15, 2018 10:55 am

Seems to work a lot better with the 2 second re-arm - 5/6 today with the stop loss kicking in at 2.50 (set to <3.0) although the horse did fade again and lost it proved that the SL worked and did avoid a potential full loss - produced 5% ROI on today's selections

Happy with that - thanks for your help :)
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

DaveJessop wrote:
Fri May 03, 2019 10:04 pm
Seems to work a lot better with the 2 second re-arm - 5/6 today with the stop loss kicking in at 2.50 (set to <3.0) although the horse did fade again and lost it proved that the SL worked and did avoid a potential full loss - produced 5% ROI on today's selections

Happy with that - thanks for your help :)

Image
Oscar
Posts: 33
Joined: Wed Mar 07, 2018 6:29 pm

Hi Dallas, or anyone out there who is familiar with this bot,

I downloaded this bot and changed a few of it's values. Then I wanted to try something different so I deleted it.
The thing is, when I try to upload it again, now it only has 3 rules;
Signal if in Loss
Reset Sig when in Profit
Green up Selection
Am I missing the "bet" rule? You say that the parameters can be changed so I'm sure there must have been a back or lay bet rule in there somewhere.
It's probably something reeeally obvious.

Thanks in advance for any help :)
User avatar
Dabbla
Posts: 662
Joined: Wed Apr 15, 2009 1:50 pm

There are only 3 rules., It monitors you manual bets.
Oscar
Posts: 33
Joined: Wed Mar 07, 2018 6:29 pm

Many thanks Dabbla,

That was indeed a duh moment :D
LilBobz
Posts: 20
Joined: Mon Dec 30, 2019 7:58 pm

Is there a way to set this to trigger when my loss hits 20% of whatever my liability is on a race (rather than at a fixed monetary amount)?
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

LilBobz wrote:
Sun Nov 15, 2020 2:34 pm
Is there a way to set this to trigger when my loss hits 20% of whatever my liability is on a race (rather than at a fixed monetary amount)?
Yes, you can store your loss (liability) against a selection as a Stored Value then adjust it by the percentage you want, then test the trade loss against that.

You'd need a Stored value rule to Store the P/L of the selection
and near the bottom of the Stored Value window use the adjustment by percentage

Then on the existing rules change it from the profit amount to look at the Stored value you've just created
LilBobz
Posts: 20
Joined: Mon Dec 30, 2019 7:58 pm

Great, will give it a try.
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

LilBobz wrote:
Sun Nov 15, 2020 4:35 pm
Great, will give it a try.
Image

If you get stuck just post back
LilBobz
Posts: 20
Joined: Mon Dec 30, 2019 7:58 pm

Dallas wrote:
Sun Nov 15, 2020 4:44 pm
LilBobz wrote:
Sun Nov 15, 2020 4:35 pm
Great, will give it a try.
Image

If you get stuck just post back
Many thanks. I've attached some screenshots showing which bits of the automation I have amended. Does this look right?
You do not have the required permissions to view the files attached to this post.
LilBobz
Posts: 20
Joined: Mon Dec 30, 2019 7:58 pm

Two more screenshots
You do not have the required permissions to view the files attached to this post.
LilBobz
Posts: 20
Joined: Mon Dec 30, 2019 7:58 pm

Think I have already spotted some errors in my rules file.

On the 'Signal if in Loss' rule I have now updated the Green All profit condition to 'less than' the stored value.

I'm also unsure if the Store P/L stored values rule should be saying -20%, 20% or 120% (I want it to trigger at a 20% of my liability loss) .
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

LilBobz wrote:
Mon Nov 16, 2020 1:32 pm
Think I have already spotted some errors in my rules file.

On the 'Signal if in Loss' rule I have now updated the Green All profit condition to 'less than' the stored value.

I'm also unsure if the Store P/L stored values rule should be saying -20%, 20% or 120% (I want it to trigger at a 20% of my liability loss) .
The adjustment on the SV should be minus 80%

That will leave a value of 20% which the condition would then look at
LilBobz
Posts: 20
Joined: Mon Dec 30, 2019 7:58 pm

Dallas wrote:
Mon Nov 16, 2020 2:04 pm
LilBobz wrote:
Mon Nov 16, 2020 1:32 pm
Think I have already spotted some errors in my rules file.

On the 'Signal if in Loss' rule I have now updated the Green All profit condition to 'less than' the stored value.

I'm also unsure if the Store P/L stored values rule should be saying -20%, 20% or 120% (I want it to trigger at a 20% of my liability loss) .
The adjustment on the SV should be minus 80%

That will leave a value of 20% which the condition would then look at
Thanks, I will give that a try later on today.
Post Reply

Return to “Bet Angel Automation - General”