Number of Selections as a Stored Value (Template) Guardian Automation Bot

User avatar
beermonsterman
Posts: 522
Joined: Sun Dec 25, 2016 2:47 pm
Location: Birmingham UK

Any suggestions for my automation rules please guys I would like to use the rule of counting runners to cancel out automated triggers if a non runner is pulled out but only if the non runner is 1st 2nd or 3rd fav if that's possible
counting from 4 hours to post or maybe always armed rule of some kind ?
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

beermonsterman wrote:
Fri Jan 22, 2021 8:19 pm
beermonsterman wrote:
Fri Jan 22, 2021 8:14 pm
Hi Dallas it monitors 6000 seconds before post
I have it set to monitor tick moves within this time scale
Thanks again
Just to note i set and forget at 6 am before i go to work and a fav can be pulled from market before my automation starts to monitor tick moves
i want the automation to recognise if runner 1-2 or 3 is pulled from market and to then ignore market if thats even possible
In theory yes it would be, it would take quite a bit of setting up with signals, i'd need to sit down sometime and step through the logic to figure out the easiest way if it is possible.

Regarding identifying if any runners have been removed, you could first run this rule then look up the maximum value using the new 'Store value from a Range' option
Then just before your rule triggers run this rule again and get the maximum number, then compare the two values and only have your back/lay rule trigger if they are equal to each other
User avatar
beermonsterman
Posts: 522
Joined: Sun Dec 25, 2016 2:47 pm
Location: Birmingham UK

Thank you Dallas great stuff I hope you manage to create a rule file for what I'm after would very much appreciate that.
I am struggling with rules "finding them a bit tricky "
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

beermonsterman wrote:
Sun Jan 31, 2021 8:20 am
Thank you Dallas great stuff I hope you manage to create a rule file for what I'm after would very much appreciate that.
I am struggling with rules "finding them a bit tricky "
Bump this thread in about a weeks times to remind me and i'll see if I can fit one in
User avatar
beermonsterman
Posts: 522
Joined: Sun Dec 25, 2016 2:47 pm
Location: Birmingham UK

Dallas your an absolute legend mate thank you
User avatar
beermonsterman
Posts: 522
Joined: Sun Dec 25, 2016 2:47 pm
Location: Birmingham UK

Need to give this a bump ive tried everything to stop my automation firing when a horse gets pulled I just cant do it .
please help you lovely bunch
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Dallas wrote:
Sun Jan 31, 2021 3:55 pm
beermonsterman wrote:
Sun Jan 31, 2021 8:20 am
Thank you Dallas great stuff I hope you manage to create a rule file for what I'm after would very much appreciate that.
I am struggling with rules "finding them a bit tricky "
Bump this thread in about a weeks times to remind me and i'll see if I can fit one in
Seven months to the day :D

I've actually got a ton of stuff on at the moment but if you can bump it again after next wed/thur i'll have the time to look at it again for you
User avatar
beermonsterman
Posts: 522
Joined: Sun Dec 25, 2016 2:47 pm
Location: Birmingham UK

Dallas wrote:
Mon Aug 30, 2021 8:55 pm
Dallas wrote:
Sun Jan 31, 2021 3:55 pm
beermonsterman wrote:
Sun Jan 31, 2021 8:20 am
Thank you Dallas great stuff I hope you manage to create a rule file for what I'm after would very much appreciate that.
I am struggling with rules "finding them a bit tricky "
Bump this thread in about a weeks times to remind me and i'll see if I can fit one in
Seven months to the day :D

I've actually got a ton of stuff on at the moment but if you can bump it again after next wed/thur i'll have the time to look at it again for you
Cool thank you pal
In the meantime I will keep at it see if I can crack it myself if I do I will come back to let you know.
User avatar
tootatoota
Posts: 56
Joined: Fri Apr 17, 2020 2:33 am

Hi Dallas,
I know there was a question asked some time back referencing how to use stored value number of selections with regards to stall numbers.
How do we reference for example outside barier(Stall)?
So if we have 10 starters i want to ID stall 10?
if we have 12 starters i want to id stall 12?
You said back then you would need to think about it?
Anything further?
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

tootatoota wrote:
Sun Oct 10, 2021 12:05 am
Hi Dallas,
I know there was a question asked some time back referencing how to use stored value number of selections with regards to stall numbers.
How do we reference for example outside barier(Stall)?
So if we have 10 starters i want to ID stall 10?
if we have 12 starters i want to id stall 12?
You said back then you would need to think about it?
Anything further?
Is this for Aus racing only?
User avatar
tootatoota
Posts: 56
Joined: Fri Apr 17, 2020 2:33 am

Hi Dallas,
Yes it is
so if this is 13 starters Barrier(Stall) 13 is the outside
Thanks
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

tootatoota wrote:
Sun Oct 10, 2021 9:08 pm
Hi Dallas,
Yes it is
so if this is 13 starters Barrier(Stall) 13 is the outside
Thanks
You'd need to store a value on each selection with an entered amount ie,
Row 1 Store a value named 'count' = 1
Row 2 Store a value named 'count' = 2
and so on

Then add a 'Update Custom Rankings of Selections' and rank by
Stored value name 'count'
In Descending Order

You'll then be able to apply your back/lay rule to
By Rank; in Custom Ranking 1
1
User avatar
tootatoota
Posts: 56
Joined: Fri Apr 17, 2020 2:33 am

Thanks Dallas i will give it a go
User avatar
tootatoota
Posts: 56
Joined: Fri Apr 17, 2020 2:33 am

Hi Dallas,
On thinking about this i cant see how this will relate to the stall number.
As no 13 for example may have stall 8, no 12 stall 6 etc
Also when i store the values do i do i store the values under 1 rule as per pic?
Screenshot (527).png
Do i also need to add "Number of Selections as a SV rule"
Appreciate your help so much sorry if i am not getting it but im sure i will get there?
Yes this is for Australian racing and i know we have different rules to you guys.
Regards
You do not have the required permissions to view the files attached to this post.
User avatar
Dallas
Posts: 22674
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

tootatoota wrote:
Mon Oct 11, 2021 10:51 pm
Hi Dallas,
On thinking about this i cant see how this will relate to the stall number.
As no 13 for example may have stall 8, no 12 stall 6 etc
Also when i store the values do i do i store the values under 1 rule as per pic?
Screenshot (527).png
Do i also need to add "Number of Selections as a SV rule"
Appreciate your help so much sorry if i am not getting it but im sure i will get there?
Yes this is for Australian racing and i know we have different rules to you guys.
Regards
It wouldn't be possible to do on UK races as saddle numbers, BF row numbers and stall draws don't correlate in any way
But for Aus racing they all match each race just like Greyhounds

So if there's 15 runners the 15th will be in stall 15, 7 runners the 7th will be in stall 7 and so on

So the steps above check the number of runners and sort them in descending order, so in a 15 runner race the 15th runner in stall 15 will be rank 1, or in a 7 runner race the 7th runner in stall 7 would be rank 1

and your back/lay rule will always be triggering on rank 1
Post Reply

Return to “Bet Angel Automation - General”