Spread Entry & Exit Servant (as shown in Peters video)

[Dallas]

hi dallas

i trust you are well.

pls could you advise me on how i can green up when the last 25% is matched on the exit servant back or lay.

rather than manually greening after..

hope this makes sense..

On the signal tab of the 'spread exit' rule set a signal on the selection
Then add a close trade on selection with greening rule, and add the following two conditions
Signal set condition - is the signal named (whatever you just called it) set on selection
Number of unmatched bets condition - on selection is equal to 0

That should do it

[Realrocknrolla]

hi dallas

i trust you are well.

pls could you advise me on how i can green up when the last 25% is matched on the exit servant back or lay.

rather than manually greening after..

hope this makes sense..

On the signal tab of the 'spread exit' rule set a signal on the selection
Then add a close trade on selection with greening rule, and add the following two conditions
Signal set condition - is the signal named (whatever you just called it) set on selection
Number of unmatched bets condition - on selection is equal to 0

That should do it

You sir…. deserve a pay rise

[gstar1975]

When I start the Servant before the time limit of 2 minutes it doesnt say "Pending" in orange it just stops and is Red.

Can anyone advise please?

[Dallas]

When I start the Servant before the time limit of 2 minutes it doesnt say "Pending" in orange it just stops and is Red.

Can anyone advise please?

The rules are 'always armed' so will fire as soon as you start them, so the light will then be red to indicate they've fired or are no longer active

[Esp2608]

Hi,

I have followed a post by Dallas to set up a servant, which was straightforward. However, when I click 'start' and select a race, when I get the 'bellboy' ring, instead of a green circle, I get a red one and nothing works? Any ideas why? This is before the race, a good 10 mins before when the prices are still reasonably still.

Thanks

Elaine

[Dallas]

Hi,

I have followed a post by Dallas to set up a servant, which was straightforward. However, when I click 'start' and select a race, when I get the 'bellboy' ring, instead of a green circle, I get a red one and nothing works? Any ideas why? This is before the race, a good 10 mins before when the prices are still reasonably still.

Thanks

Elaine

As per the post above thats what it's meant to do, as soon as its started the bell will sound, a spread of back/lay or exits bets is placed and status light will go red to indicate the bets have been placed and no rules are still active

[gstar1975]

Hi Dallas

Is it possible to do a Entry with full stake but on both sides of the Book at Best Reverse Price and then which ever starts to get matched first cancel the other bet and then place spread exit from the stake that got matched?

[gstar1975]

Is there a servant to close out your position say you have 10 exits (10% net stake) from 1 to 10 ticks above entry at every 1 tick above the where you entered, say some of them got matched but 5 didn't, so now you need a servant to place those closing bets at the Best Reverse Price until matched then drag the others when they are closed to give you an average exit, just like Peter has shown in another video the best way to exit a trade

[Dallas]

Hi Dallas

Is it possible to do a Entry with full stake but on both sides of the Book at Best Reverse Price and then which ever starts to get matched first cancel the other bet and then place spread exit from the stake that got matched?

Sorry must of missed this one at the time

Yes, you could by adding a 'Cancel unmatched bets on selection (price dependant rule) and on the parameters tab set it to cancel only lay bets
Then add a 'Matched Bets Amount' condition to test the back bets matched are greater than £0

Then add the same rule again this time set to cancel only the back bets
and use the condition to test the lay bets matched are greater than £0

[Dallas]

Is there a servant to close out your position say you have 10 exits (10% net stake) from 1 to 10 ticks above entry at every 1 tick above the where you entered, say some of them got matched but 5 didn't, so now you need a servant to place those closing bets at the Best Reverse Price until matched then drag the others when they are closed to give you an average exit, just like Peter has shown in another video the best way to exit a trade

So assuming 5 of 10 spread bets are matched you then want the remaining (when you choose) to be closed at the best price?

I'm just not sure what you mean by the following?
then drag the others when they are closed to give you an average exit

[gstar1975]

Is there a servant to close out your position say you have 10 exits (10% net stake) from 1 to 10 ticks above entry at every 1 tick above the where you entered, say some of them got matched but 5 didn't, so now you need a servant to place those closing bets at the Best Reverse Price until matched then drag the others when they are closed to give you an average exit, just like Peter has shown in another video the best way to exit a trade

So assuming 5 of 10 spread bets are matched you then want the remaining (when you choose) to be closed at the best price?

I'm just not sure what you mean by the following?
then drag the others when they are closed to give you an average exit

So keep placing the closing bets (net 10% of stake) at the Best Reverse Price until either all closing bets are matched or until 0secs left

[Jodami]

Hi Dallas

I've got this Servant loaded as a Custom Column on the One Click screen but when I use back as an Iceberg Back and Lay but in that context it will only place a split stake on what the back and lay stake default is set on the One Click screen.

Is there a way of using this type of servant to back and lay to a set stake - for instance spreading a back stake of £50 at the best current three market prices and doing the same to a set lay liability say of £100. I'm sure I've seen a servant that is capable of doing this.

[Dallas]

Hi Dallas

I've got this Servant loaded as a Custom Column on the One Click screen but when I use back as an Iceberg Back and Lay but in that context it will only place a split stake on what the back and lay stake default is set on the One Click screen.

Is there a way of using this type of servant to back and lay to a set stake - for instance spreading a back stake of £50 at the best current three market prices and doing the same to a set lay liability say of £100. I'm sure I've seen a servant that is capable of doing this.

The stake can be changed on the parameters tab to whatever you want

[Jodami]

Hi Dallas

I've got this Servant loaded as a Custom Column on the One Click screen but when I use back as an Iceberg Back and Lay but in that context it will only place a split stake on what the back and lay stake default is set on the One Click screen.

Is there a way of using this type of servant to back and lay to a set stake - for instance spreading a back stake of £50 at the best current three market prices and doing the same to a set lay liability say of £100. I'm sure I've seen a servant that is capable of doing this.

The stake can be changed on the parameters tab to whatever you want

In the scenario that I mention which parameters would I need to set?

[Dallas]

Hi Dallas

I've got this Servant loaded as a Custom Column on the One Click screen but when I use back as an Iceberg Back and Lay but in that context it will only place a split stake on what the back and lay stake default is set on the One Click screen.

Is there a way of using this type of servant to back and lay to a set stake - for instance spreading a back stake of £50 at the best current three market prices and doing the same to a set lay liability say of £100. I'm sure I've seen a servant that is capable of doing this.

The stake can be changed on the parameters tab to whatever you want

In the scenario that I mention which parameters would I need to set?

You'd use a Fixed amount