Candlestick Chart with High & Low Traded Price Lines - Advanced Charts

Doji gravestones, Candlesticks. No, it's not a haunted house, it's your own custom advanced charting!
Post Reply
User avatar
Dallas
Posts: 22673
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

The following ready-made Advanced Chart will display the candlestick chart with highest and lowest traded line chart for each selection, the chart updates every 5 seconds an displays the last 50 data points as shown in the image below

Candlestick with Hi Lo Prices.JPG


To use this Advanced Chart click the Volume% Chart.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'

Adv Chart Import.jpg
Candlestick with Hi_Lo Traded Prices.bcs


There is an option within the advanced chart settings that can be used to display the high/low traded prices but this will show them since the market was opened, to allow more control and flexibility I've included a rules file that you can apply to the markets in Guardian and it will start recording the high/low price 10mins before the event start (or you can edit it to whatever time you want)

To display the information on this Advanced Chart you will also need to download and import the following rules file into Guardian, once downloaded to your computer open Guardian and on the ‘Automation’ tab click ‘Import a Rules’ file.
Then each day just add your markets to Guardian and apply that rules file to them all. The rules file will then store the required data from the markets and pass that to the chart file.

Guardian Import Image.jpg
Store Hi & Lo Traded Prices.baf
You do not have the required permissions to view the files attached to this post.
parrettt
Posts: 49
Joined: Sun Jul 28, 2013 11:31 pm

Will try it tomorrow, thanks
parrettt
Posts: 49
Joined: Sun Jul 28, 2013 11:31 pm

Hi again Dallas
i ended up using the VWAP marker and charts. Everything is excellent but it means i have lost the price/volume over time charts that i had on the default chart i was using
I cannot see how to change the charts below the ladders to this. Could you please tell me where i should be looking?
Thanks Richard
User avatar
Dallas
Posts: 22673
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

parrettt wrote:
Thu Jan 14, 2021 6:18 pm
Hi again Dallas
i ended up using the VWAP marker and charts. Everything is excellent but it means i have lost the price/volume over time charts that i had on the default chart i was using
I cannot see how to change the charts below the ladders to this. Could you please tell me where i should be looking?
Thanks Richard
If you mean as part of your embedded charts you can enable both from your ladder settings area
https://www.betangel.com/user-guide/emb ... harts.html

If that's not what you meant if you could clarify perhaps with a screenshot or two i'll advise further
parrettt
Posts: 49
Joined: Sun Jul 28, 2013 11:31 pm

Got it!
Thanks i did not realise it was called the Betfair chart. Bit obvious really!
User avatar
Realrocknrolla
Posts: 1903
Joined: Fri Jun 05, 2020 7:15 pm

Hi Dallas

Can the Store Hi & Lo Traded Prices.baf be used at the same time as the Hi Lo Price data baf?

Cheers mate

Micky
User avatar
Realrocknrolla
Posts: 1903
Joined: Fri Jun 05, 2020 7:15 pm

Realrocknrolla wrote:
Sun Jan 31, 2021 12:12 pm
Hi Dallas

Can the Store Hi & Lo Traded Prices.baf be used at the same time as the Hi Lo Price data baf?

Cheers mate

Micky
Nudge
captainbang
Posts: 82
Joined: Tue May 01, 2018 1:33 pm

I just downloaded this and attempted to import. When I clicked on settings, the settings window opens which is pinned, then you click advanced chart settings which opens behind the settings window and i then click import which opens the windows import screen behind the pinned bet angel settings
Now i cant do anything and even the bleedin task manager opens behind the pinned bet angel settings so i cant even close bet angel. So now i have to shut down the pc
User avatar
Realrocknrolla
Posts: 1903
Joined: Fri Jun 05, 2020 7:15 pm

captainbang wrote:
Mon Feb 01, 2021 12:41 pm
I just downloaded this and attempted to import. When I clicked on settings, the settings window opens which is pinned, then you click advanced chart settings which opens behind the settings window and i then click import which opens the windows import screen behind the pinned bet angel settings
Now i cant do anything and even the bleedin task manager opens behind the pinned bet angel settings so i cant even close bet angel. So now i have to shut down the pc
No need... just unpin everything.
User avatar
Dallas
Posts: 22673
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

Realrocknrolla wrote:
Sun Jan 31, 2021 12:12 pm
Hi Dallas

Can the Store Hi & Lo Traded Prices.baf be used at the same time as the Hi Lo Price data baf?

Cheers mate

Micky
Not sure if you mean the 'Hi Lo Traded Prices' baf but whichever one it is as long as they are not both being stored to the same History List which i'm certain they don't then you'll be able to use them at the same time.
The worst you'll need to do is save them to another history list or as another Stored value name
User avatar
Realrocknrolla
Posts: 1903
Joined: Fri Jun 05, 2020 7:15 pm

Dallas wrote:
Mon Feb 01, 2021 5:32 pm
Realrocknrolla wrote:
Sun Jan 31, 2021 12:12 pm
Hi Dallas

Can the Store Hi & Lo Traded Prices.baf be used at the same time as the Hi Lo Price data baf?

Cheers mate

Micky
Not sure if you mean the 'Hi Lo Traded Prices' baf but whichever one it is as long as they are not both being stored to the same History List which i'm certain they don't then you'll be able to use them at the same time.
The worst you'll need to do is save them to another history list or as another Stored value name
Ok mate.

I did try but things messed up so left it until i am confident
BIMtown
Posts: 16
Joined: Thu Nov 14, 2019 10:13 am

is this only available to professional users
User avatar
Dallas
Posts: 22673
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

BIMtown wrote:
Fri Jun 11, 2021 8:57 pm
is this only available to professional users
Yes, you need the pro version to run the rules file required to capture the hi/lo traded prices
User avatar
gstar1975
Posts: 615
Joined: Thu Nov 24, 2011 11:59 am

This only stores the high and low from 10 mins out. But what if there has been a higher high or a lower low price matched since the market opened?

How can I get it to show the highest/lowest price matched with money matched with say minimum £100 matched?

Also how do I know if I have a History List already in use in another rules file? Is it ok to use the same history list for different rules files?
User avatar
Dallas
Posts: 22673
Joined: Sun Aug 09, 2015 10:57 pm
Location: Working From Home

gstar1975 wrote:
Wed Aug 10, 2022 10:56 am
This only stores the high and low from 10 mins out. But what if there has been a higher high or a lower low price matched since the market opened?

How can I get it to show the highest/lowest price matched with money matched with say minimum £100 matched?
You'll either need to arm the rules earlier and ensure you have the markets added to Guardian and the rule applied from the time you want to look from
Or
You'll need to create two stored values for every price point,

There's a template here with the first 8 Stored Values done to test the money waiting at the 4th and 5th best prices (you'd just need to change the SV from 'money waiting' to 'traded volume')
and then continue adding the new SV's rules for each additional price point
viewtopic.php?f=56&t=26012

You would also need a Stored Value condition to test the traded volume is above £100 or whatever amount you want
Post Reply

Return to “Advanced charting”