Multi Band coloured volume chart
This chart is a template for passing additional info to your charts.
In this case im passing the selections volume increase over the last 5 seconds.
The volume increase appears as coloured bands on the LTP chart.
The bands are as >
volume increase over the last 5 seconds.
£0 (BLACK)
£1 - 100 (PUPRPLE)
£100 - 500 (BLUE)
£500 - 1000 (GREEN)
£1000 - 5000 (YELLOW)
£5000 - 10000 (ORANGE)
£10000 > (RED)
This is achieved by having one rule for each band. Most of the rules have 2 conditions, both are (STORED VALUE CONDITON). One for < and one for > the stored value to test the thresholds. This is so the rule can identify the correct band.
When the band is identified (the rule conditions have been met). The rule will store the LTP as its own History list.
Eg.
£0 (BLACK) History list 1
£1 - 100 (PUPRPLE) History list 2
The same rule will also clear every other history list for that selection.
This is a helpful chart the can be adapted to give you a better understanding of what is happening in the market.
If you wish to change the info going to the band rules, you will need to change the following >
To keep a looping value e.g every 5 seconds subtract from previous.
Change all 3 stored values in the rules (LATST 5 SECONDS (1sv) and (LATST 5 SECONDS 1 (2sv)
From volume of selection to (whatever you want)
If you want raw Info such as WOM, You will need to delete the rule (LATST 5 SECONDS) and the SV (LATST 5 SECONDS) from the rule (LATST 5 SECONDS 1).
So you should be left with rule (LATST 5 SECONDS 1) and the SV (LATST 5 SECONDS 1)
Change the SV (LATST 5 SECONDS 1) to WOM or whatever you wish.
You will then have to change the thresholds (conditions) in the colour band rules.
**YOU WILL NEED TO DOWNLOAD THE GUADIAN FILE ON THE NEXT PAGE DOWN.
Then add that to guardian.
Chart filled
Candle chart