Do you use (restricted refresh rates) or (Automatically switch Bet Angel market) ?
The problem I was having, the hotkeys were triggering on the wrong markets because Guardian was too fast.
If you’re using (restricted refresh rates) or (Automatically switch Bet Angel market) this would slow it enough to work (I think).
For example, If you switch to a (Perry Bar) market at 2 minutes or 2 hours. You could set a safety servant to fire a hotkey.
That hot key will change Auto 1 to the (Perry Bar) file.
Or similar method if using (restricted refresh rates).
One other thing I wanted to mention, in your screen shot above, you have a hot key profile (D1).
It only shows hot keys for Crayford, are you aware that you will need to set up hot keys for each track on the same profile?
Guardian/Keyboard Shortcut
So Yes i do use[ attachment=0]refrsh.PNG[/attachment] and do i Automatically switch Bet Angel market @ 150
The pic i attached did show Crayford on as i thought that might be the way around it that you added the tracks one at a time and then be able assign rules to them. But i couldnt find a way to only attach rules files to specified market.
So i have now just deleted that rules and are adding All tracks market in one go but still have the problem of not being only to assign certain bits of Automation to certain tracks
So it was an error to leave it on there.
The pic i attached did show Crayford on as i thought that might be the way around it that you added the tracks one at a time and then be able assign rules to them. But i couldnt find a way to only attach rules files to specified market.
So i have now just deleted that rules and are adding All tracks market in one go but still have the problem of not being only to assign certain bits of Automation to certain tracks
So it was an error to leave it on there.
You do not have the required permissions to view the files attached to this post.
I have come across this
https://www.betfairtradingblog.com/betf ... one-click/
But this is done using Market types not how i need to assign by Market names
https://www.betfairtradingblog.com/betf ... one-click/
But this is done using Market types not how i need to assign by Market names
The pic below shows what stage i have managed to get to.
As you can see i have pulled in the 5 tracks i wish to monitor.
I have been able to blanket apply a couple of rules the "Alert Matched Bet" in totally correct.
In Auto rules 2 i have applied 1D_10 this is my stock dogs rules but for races at Crayford and Sunderland this rules needs to be replaced with a Track specific rules .
And in Auto 1 i need to apply another track specific rule.
So with the help of Dabbla this is as far as i have got - which is helpful but not quiet all the way there yet!.
As you can see i have pulled in the 5 tracks i wish to monitor.
I have been able to blanket apply a couple of rules the "Alert Matched Bet" in totally correct.
In Auto rules 2 i have applied 1D_10 this is my stock dogs rules but for races at Crayford and Sunderland this rules needs to be replaced with a Track specific rules .
And in Auto 1 i need to apply another track specific rule.
So with the help of Dabbla this is as far as i have got - which is helpful but not quiet all the way there yet!.
You do not have the required permissions to view the files attached to this post.
I have it working to some degree, it not the most polished file but it works.
You will need to add hot keys for each track and add (Alert 1) to Guardian. I’m also not too sure how well this will work if you’re manually trading at the same time.
Will you be trading manually at the same time?
You add this file to your already existing Hotkey. This goes in to Automation 1.
This file controls the alerts and hot keys.
When the Market starts refreshing, an Alert will be set on that market this will then start a 5 seconds delay.
After 5 seconds another alert is set, then this market will open in (ladder 20).
(note) The first time this ladder opens, make it small and hide it somewhere on your screen. Then save the screen layout.
A Hotkey will then trigger for that venue, changing (Automation rules 1) to the specific auto file for that track.
I do see one other issue, that is if markets start at the same time, but that can be for another day.
You will need to add hot keys for each track and add (Alert 1) to Guardian. I’m also not too sure how well this will work if you’re manually trading at the same time.
Will you be trading manually at the same time?
You add this file to your already existing Hotkey. This goes in to Automation 1.
This file controls the alerts and hot keys.
When the Market starts refreshing, an Alert will be set on that market this will then start a 5 seconds delay.
After 5 seconds another alert is set, then this market will open in (ladder 20).
(note) The first time this ladder opens, make it small and hide it somewhere on your screen. Then save the screen layout.
A Hotkey will then trigger for that venue, changing (Automation rules 1) to the specific auto file for that track.
I do see one other issue, that is if markets start at the same time, but that can be for another day.
You do not have the required permissions to view the files attached to this post.