Back,Lay, LTP & VWAP Price Lines - Advanced Charts

[Dallas]

The following are two ready-made Advanced Charts, one will display the last traded price (LTP) and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying 150 data points and plotting a new data point every 5 seconds as shown in the image below

LTP with VWAP.jpg

These are useful charts if you want to pick an entry/exit as the price nears or crosses over the VWAP, or you may want to take a position when the LTP has deviated from the VWAP

To use this Advanced Chart click the LTP with VWAP.bcs file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'

Adv Chart Import.jpg

LTP with VWAP.bcs

The second advanced chart is similar to the first but will display the back/lay prices and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying the 60 data points and is plotting a new data point every 5 seconds as shown in the image below

Back & Lay Price with VWAP.jpg

To use this Advanced Chart click the Back_Lay Price with VWAP Chart.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'

Back_Lay Price with VWAP.bcs

To display the information on this Advanced Chart you will also need to download and import the following rules file into Guardian, once downloaded to your computer open Guardian and on the ‘Automation’ tab click ‘Import a Rules’ file.
Then each day just add your markets to Guardian and apply that rules file to them all. The rules file will then store the required data from the markets and pass that to the chart file.

Guardian Import Image.jpg

[lotora]

Then in the lower left corner of your Advanced Charts window click 'Import'
LTP with VWAP.bcs

I can't find this option (check file attached!)

[Dallas]

Then in the lower left corner of your Advanced Charts window click 'Import'
LTP with VWAP.bcs

I can't find this option (check file attached!)

You need to install Bet Angel V1.55 from the following forum thread
viewtopic.php?f=46&t=21544

Not the Bet Angel website

[Realrocknrolla]

Beautiful!!!!!!!!!!

Loving this indicator!!! I have adjusted the time frames but this helps me choose when to enter and when to not!!!! 9/10 anyway!!!

Love it!

[Dallas]

Beautiful!!!!!!!!!!

Loving this indicator!!! I have adjusted the time frames but this helps me choose when to enter and when to not!!!! 9/10 anyway!!!

Love it!

What do I need to get the 10

[Realrocknrolla]

A crystal ball in most instances my friend!

I wondered if there was already an alert that fires when the VWAP is crossed? From the servants maybe? An added indication.

[Dallas]

A crystal ball in most instances my friend!

I wondered if there was already an alert that fires when the VWAP is crossed? From the servants maybe? An added indication.

There is indeed
viewtopic.php?f=66&t=18341

[Realrocknrolla]

Outstanding!

I’ve been working on a breakout indicator... you’re gonna tell me there is one already too aint ya!

[Dallas]

Outstanding!

I’ve been working on a breakout indicator... you’re gonna tell me there is one already too aint ya!

99.9%, there one that will trigger at the top and bottom of a range which would be easy to edit to when it breaks out
viewtopic.php?f=53&t=18655

[Realrocknrolla]

Outstanding!

I’ve been working on a breakout indicator... you’re gonna tell me there is one already too aint ya!

99.9%, there one that will trigger at the top and bottom of a range which would be easy to edit to when it breaks out
viewtopic.php?f=53&t=18655

Bloody brilliant. Your an asset to everyone involved with BetAngel and PW should give you a 100% salary increase!

Thanks again bud!

[Realrocknrolla]

The following are two ready-made Advanced Charts, one will display the last traded price (LTP) and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying 150 data points and plotting a new data point every 5 seconds as shown in the image below


LTP with VWAP.jpg



These are useful charts if you want to pick an entry/exit as the price nears or crosses over the VWAP, or you may want to take a position when the LTP has deviated from the VWAP

To use this Advanced Chart click the LTP with VWAP.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'

Adv Chart Import.jpg

LTP with VWAP.bcs



The second advanced chart is similar to the first but will display the back/lay prices and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying the 60 data points and is plotting a new data point every 5 seconds as shown in the image below


Back & Lay Price with VWAP.jpg



To use this Advanced Chart click the Back_Lay Price with VWAP Chart.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'
Back_Lay Price with VWAP.bcs


To display the information on this Advanced Chart you will also need to download and import the following rules file into Guardian, once downloaded to your computer open Guardian and on the ‘Automation’ tab click ‘Import a Rules’ file.
Then each day just add your markets to Guardian and apply that rules file to them all. The rules file will then store the required data from the markets and pass that to the chart file.

Guardian Import Image.jpg

Hi Dallas

To use the Alert and the charts do I have to incorporate the two rules as one in the High Lo rule?

viewtopic.php?f=66&t=18341

Thanks mate

[Dallas]

The following are two ready-made Advanced Charts, one will display the last traded price (LTP) and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying 150 data points and plotting a new data point every 5 seconds as shown in the image below


LTP with VWAP.jpg



These are useful charts if you want to pick an entry/exit as the price nears or crosses over the VWAP, or you may want to take a position when the LTP has deviated from the VWAP

To use this Advanced Chart click the LTP with VWAP.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'

Adv Chart Import.jpg

LTP with VWAP.bcs



The second advanced chart is similar to the first but will display the back/lay prices and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying the 60 data points and is plotting a new data point every 5 seconds as shown in the image below


Back & Lay Price with VWAP.jpg



To use this Advanced Chart click the Back_Lay Price with VWAP Chart.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'
Back_Lay Price with VWAP.bcs


To display the information on this Advanced Chart you will also need to download and import the following rules file into Guardian, once downloaded to your computer open Guardian and on the ‘Automation’ tab click ‘Import a Rules’ file.
Then each day just add your markets to Guardian and apply that rules file to them all. The rules file will then store the required data from the markets and pass that to the chart file.

Guardian Import Image.jpg

Hi Dallas

To use the Alert and the charts do I have to incorporate the two rules as one in the High Lo rule?

viewtopic.php?f=66&t=18341

Thanks mate

Yes, if you copy both sets of rules into one file it should work OK, the Alert uses regular Stored Values whereas the chart file from this thread uses History Lists.
You should be able to tidy it up a bit and run both from the History lists if you wanted to

[Realrocknrolla]

The following are two ready-made Advanced Charts, one will display the last traded price (LTP) and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying 150 data points and plotting a new data point every 5 seconds as shown in the image below


LTP with VWAP.jpg



These are useful charts if you want to pick an entry/exit as the price nears or crosses over the VWAP, or you may want to take a position when the LTP has deviated from the VWAP

To use this Advanced Chart click the LTP with VWAP.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'

Adv Chart Import.jpg

LTP with VWAP.bcs



The second advanced chart is similar to the first but will display the back/lay prices and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying the 60 data points and is plotting a new data point every 5 seconds as shown in the image below


Back & Lay Price with VWAP.jpg



To use this Advanced Chart click the Back_Lay Price with VWAP Chart.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'
Back_Lay Price with VWAP.bcs


To display the information on this Advanced Chart you will also need to download and import the following rules file into Guardian, once downloaded to your computer open Guardian and on the ‘Automation’ tab click ‘Import a Rules’ file.
Then each day just add your markets to Guardian and apply that rules file to them all. The rules file will then store the required data from the markets and pass that to the chart file.

Guardian Import Image.jpg

Hi Dallas

To use the Alert and the charts do I have to incorporate the two rules as one in the High Lo rule?

viewtopic.php?f=66&t=18341

Thanks mate

Yes, if you copy both sets of rules into one file it should work OK, the Alert uses regular Stored Values whereas the chart file from this thread uses History Lists.
You should be able to tidy it up a bit and run both from the History lists if you wanted to

Cheers mucka!

[Anbell]

Outstanding!

I’ve been working on a breakout indicator... you’re gonna tell me there is one already too aint ya!

99.9%, there one that will trigger at the top and bottom of a range which would be easy to edit to when it breaks out
viewtopic.php?f=53&t=18655

Dallas - I've just started using a modified version of this. It is very useful, thankyou. I've got an issue where the vwap sometimes registers as 'zero' at the start of the session which ruins the vertical scale. Any idea what I'm doing wrong or how to fix it?

Thanks again

[Dallas]

Outstanding!

I’ve been working on a breakout indicator... you’re gonna tell me there is one already too aint ya!

99.9%, there one that will trigger at the top and bottom of a range which would be easy to edit to when it breaks out
viewtopic.php?f=53&t=18655

Dallas - I've just started using a modified version of this. It is very useful, thankyou. I've got an issue where the vwap sometimes registers as 'zero' at the start of the session which ruins the vertical scale. Any idea what I'm doing wrong or how to fix it?

Thanks again

Are you applying it to markets really early?
You could try adding a condition to test the VWAP is greater than 1
Which should stop it plotting until a 'proper' value is present