Back,Lay, LTP & VWAP Price Lines - Advanced Charts

Doji gravestones, Candlesticks. No, it's not a haunted house, it's your own custom advanced charting!
User avatar
Realrocknrolla
Posts: 464
Joined: Fri Jun 05, 2020 7:15 pm

Dallas wrote:
Fri Jul 24, 2020 2:43 pm
The following are two ready-made Advanced Charts, one will display the last traded price (LTP) and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying 150 data points and plotting a new data point every 5 seconds as shown in the image below


LTP with VWAP.jpg



These are useful charts if you want to pick an entry/exit as the price nears or crosses over the VWAP, or you may want to take a position when the LTP has deviated from the VWAP

To use this Advanced Chart click the LTP with VWAP.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'

Adv Chart Import.jpg

LTP with VWAP.bcs



The second advanced chart is similar to the first but will display the back/lay prices and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying the 60 data points and is plotting a new data point every 5 seconds as shown in the image below


Back & Lay Price with VWAP.jpg



To use this Advanced Chart click the Back_Lay Price with VWAP Chart.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'
Back_Lay Price with VWAP.bcs


To display the information on this Advanced Chart you will also need to download and import the following rules file into Guardian, once downloaded to your computer open Guardian and on the ‘Automation’ tab click ‘Import a Rules’ file.
Then each day just add your markets to Guardian and apply that rules file to them all. The rules file will then store the required data from the markets and pass that to the chart file.

Guardian Import Image.jpg
Hi Dallas

To use the Alert and the charts do I have to incorporate the two rules as one in the High Lo rule?

viewtopic.php?f=66&t=18341

Thanks mate
User avatar
Dallas
Posts: 16049
Joined: Sun Aug 09, 2015 10:57 pm
Contact:

Realrocknrolla wrote:
Mon Jan 11, 2021 10:47 am
Dallas wrote:
Fri Jul 24, 2020 2:43 pm
The following are two ready-made Advanced Charts, one will display the last traded price (LTP) and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying 150 data points and plotting a new data point every 5 seconds as shown in the image below


LTP with VWAP.jpg



These are useful charts if you want to pick an entry/exit as the price nears or crosses over the VWAP, or you may want to take a position when the LTP has deviated from the VWAP

To use this Advanced Chart click the LTP with VWAP.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'

Adv Chart Import.jpg

LTP with VWAP.bcs



The second advanced chart is similar to the first but will display the back/lay prices and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying the 60 data points and is plotting a new data point every 5 seconds as shown in the image below


Back & Lay Price with VWAP.jpg



To use this Advanced Chart click the Back_Lay Price with VWAP Chart.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'
Back_Lay Price with VWAP.bcs


To display the information on this Advanced Chart you will also need to download and import the following rules file into Guardian, once downloaded to your computer open Guardian and on the ‘Automation’ tab click ‘Import a Rules’ file.
Then each day just add your markets to Guardian and apply that rules file to them all. The rules file will then store the required data from the markets and pass that to the chart file.

Guardian Import Image.jpg
Hi Dallas

To use the Alert and the charts do I have to incorporate the two rules as one in the High Lo rule?

viewtopic.php?f=66&t=18341

Thanks mate
Yes, if you copy both sets of rules into one file it should work OK, the Alert uses regular Stored Values whereas the chart file from this thread uses History Lists.
You should be able to tidy it up a bit and run both from the History lists if you wanted to
User avatar
Realrocknrolla
Posts: 464
Joined: Fri Jun 05, 2020 7:15 pm

Dallas wrote:
Mon Jan 11, 2021 7:13 pm
Realrocknrolla wrote:
Mon Jan 11, 2021 10:47 am
Dallas wrote:
Fri Jul 24, 2020 2:43 pm
The following are two ready-made Advanced Charts, one will display the last traded price (LTP) and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying 150 data points and plotting a new data point every 5 seconds as shown in the image below


LTP with VWAP.jpg



These are useful charts if you want to pick an entry/exit as the price nears or crosses over the VWAP, or you may want to take a position when the LTP has deviated from the VWAP

To use this Advanced Chart click the LTP with VWAP.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'

Adv Chart Import.jpg

LTP with VWAP.bcs



The second advanced chart is similar to the first but will display the back/lay prices and Volume Weighted Average Price (VWAP) as line charts for each selection, the charts are displaying the 60 data points and is plotting a new data point every 5 seconds as shown in the image below


Back & Lay Price with VWAP.jpg



To use this Advanced Chart click the Back_Lay Price with VWAP Chart.blc file below to download it to your computer, then in the top left corner of your screen click
Settings > Edit Settings > Charts > Advanced Charts
Then in the lower left corner of your Advanced Charts window click 'Import'
Back_Lay Price with VWAP.bcs


To display the information on this Advanced Chart you will also need to download and import the following rules file into Guardian, once downloaded to your computer open Guardian and on the ‘Automation’ tab click ‘Import a Rules’ file.
Then each day just add your markets to Guardian and apply that rules file to them all. The rules file will then store the required data from the markets and pass that to the chart file.

Guardian Import Image.jpg
Hi Dallas

To use the Alert and the charts do I have to incorporate the two rules as one in the High Lo rule?

viewtopic.php?f=66&t=18341

Thanks mate
Yes, if you copy both sets of rules into one file it should work OK, the Alert uses regular Stored Values whereas the chart file from this thread uses History Lists.
You should be able to tidy it up a bit and run both from the History lists if you wanted to
Cheers mucka!
Anbell
Posts: 928
Joined: Fri Apr 05, 2019 2:31 am

Dallas wrote:
Sun Jan 10, 2021 5:27 pm
Realrocknrolla wrote:
Sun Jan 10, 2021 5:21 pm
Outstanding!

I’ve been working on a breakout indicator... you’re gonna tell me there is one already too aint ya! 🤣🤣🤣
99.9%, there one that will trigger at the top and bottom of a range which would be easy to edit to when it breaks out
viewtopic.php?f=53&t=18655
Dallas - I've just started using a modified version of this. It is very useful, thankyou. I've got an issue where the vwap sometimes registers as 'zero' at the start of the session which ruins the vertical scale. Any idea what I'm doing wrong or how to fix it?

Thanks again
User avatar
Dallas
Posts: 16049
Joined: Sun Aug 09, 2015 10:57 pm
Contact:

Anbell wrote:
Thu Jan 14, 2021 9:22 am
Dallas wrote:
Sun Jan 10, 2021 5:27 pm
Realrocknrolla wrote:
Sun Jan 10, 2021 5:21 pm
Outstanding!

I’ve been working on a breakout indicator... you’re gonna tell me there is one already too aint ya! 🤣🤣🤣
99.9%, there one that will trigger at the top and bottom of a range which would be easy to edit to when it breaks out
viewtopic.php?f=53&t=18655
Dallas - I've just started using a modified version of this. It is very useful, thankyou. I've got an issue where the vwap sometimes registers as 'zero' at the start of the session which ruins the vertical scale. Any idea what I'm doing wrong or how to fix it?

Thanks again
Are you applying it to markets really early?
You could try adding a condition to test the VWAP is greater than 1
Which should stop it plotting until a 'proper' value is present
Anbell
Posts: 928
Joined: Fri Apr 05, 2019 2:31 am

Dallas wrote:
Fri Jan 15, 2021 12:28 pm
Anbell wrote:
Thu Jan 14, 2021 9:22 am
Dallas wrote:
Sun Jan 10, 2021 5:27 pm


99.9%, there one that will trigger at the top and bottom of a range which would be easy to edit to when it breaks out
viewtopic.php?f=53&t=18655
Dallas - I've just started using a modified version of this. It is very useful, thankyou. I've got an issue where the vwap sometimes registers as 'zero' at the start of the session which ruins the vertical scale. Any idea what I'm doing wrong or how to fix it?

Thanks again
Are you applying it to markets really early?
You could try adding a condition to test the VWAP is greater than 1
Which should stop it plotting until a 'proper' value is present
THanks Dallas

I wasnt going early, but the VWAP>1 condition solved the issue. Thanks so much.
Post Reply

Return to “Bet Angel - Advanced charts”