Signal when Goals are Scored Guardian Automation Bot

[Dabbla]

It sounds like that you either have restricted refresh on in guardian or your computer may have gone to sleep.

Ill point you to this from Dallas OP
""Without an actual score feed to trigger bets following a goal this is the next best way to achieve this. Both automation bots are set up for and work very well on matches involving equally matched teams (but can never be 100%) so if you have a strategy for these type of games that is dependent on goals being scored this will definitely help.

**On some occasions the odds will move in a similar way if a red card is issued which could cause the signal to still be set although this won’t happen all that often.**

If your trading matches with a strong home or away fav the file can still be used but a slight adjustment to the number of odds movement allowed and to which selection before a signal is set will be required for these type of games. "" From the OP.


It’s possible that the market didn’t move enough to trigger a goal.

Ok so I have test in a weak market and a got some dodgy results,
Now this could be because there was no money in the market ,but it did get a little trigger happy and register goals that weren’t real goals. Especially at the end that’s something you will have to look in to. You might want to add a fixed odds condition to stop this. (Its late and I can’t think no more )
The 1-0 Green rule triggered exactly 02:53:51 65th minute of the match.
I have added the condition unsuspended time conditions < less than 80 so it stop after the goal.(I think that will work ) So the market must be update quicker than 20 seconds. This will eliminate the double goal count.
I have update the original copy. I’ll try and test it later today. Did you change it to the draw ?

LTD FULL 3.baf

The match finished 0-2
15/02/2019 01:30:47: Guardian has detected that the market is in-play.
15/02/2019 02:52:48: Guardian has detected that the market is now unsuspended
15/02/2019 02:53:51: [G_Auto] : Automation Signal for market: Total Goal = 1
15/02/2019 02:53:51: [G_Auto] : Automation Signal for UCR: Away Goal = 1
15/02/2019 02:54:21: [G_Auto] : Automation Signal for market: Total Goal = 2
15/02/2019 02:54:21: [G_Auto] : Automation Signal for UCR: Away Goal = 2
15/02/2019 02:54:36: [G_Auto] : Automation Signal for market: Total Goal = 3
15/02/2019 02:54:36: [G_Auto] : Automation Signal for UCR: Home Goal = 1
15/02/2019 02:55:25: [G_Auto] : Automation Signal for market: Total Goal = 4
15/02/2019 02:55:25: [G_Auto] : Automation Signal for UCR: Away Goal = 3
15/02/2019 02:55:56: [G_Auto] : Automation Signal for market: Total Goal = 5
15/02/2019 02:55:56: [G_Auto] : Automation Signal for UCR: Away Goal = 4
15/02/2019 02:56:26: Guardian has detected that the market is suspended
15/02/2019 02:56:30: Guardian has detected that the market is now unsuspended
5/02/2019 02:59:21: Guardian has detected that the market is now unsuspended
15/02/2019 03:02:12: [G_Auto] : Automation Signal for market: Total Goal = 7
15/02/2019 03:02:12: [G_Auto] : Automation Signal for UCR: Home Goal = 2
15/02/2019 03:03:18: [G_Auto] : Automation Signal for market: Total Goal = 8
15/02/2019 03:03:18: [G_Auto] : Automation Signal for UCR: Home Goal = 3
15/02/2019 03:03:48: [G_Auto] : Automation Signal for market: Total Goal = 9
15/02/2019 03:03:48: [G_Auto] : Automation Signal for UCR: Home Goal = 4
15/02/2019 03:04:18: [G_Auto] : Automation Signal for market: Total Goal = 10
15/02/2019 03:04:18: [G_Auto] : Automation Signal for UCR: Home Goal = 5
15/02/2019 03:23:06: Guardian has detected that the market is suspended

[richjulian15]

I’ll run the updated file later too mate.

When you say about changing to the draw, what exactly do you mean?

Thanks for the continued support, means a lot

[Dabbla]

The OP rule was for the draw, I mentioned in my other post about changing it back ,I’ll take it by that you haven’t.

I have forgot to put some of the conditions back in. I have changed it back and up dated my post above ^^^^ LTD FULL 3.
So check the lay the draw rule and conditions and i have added back the green rules.

[richjulian15]

I’m a touch confused by what you want me to change mate.

In the LTD 3 file you’ve uploaded, it’s set to place a BACK bet on the draw - is this what you want me to change?

[Dabbla]

Sorry that was lack of sleep and too much going on. I have updated it to lay ^^^^ .
The original rule operated around the price of the draw but mine operates around the home.
It doesn’t really matter. Have a test and see what results you get.

[richjulian15]

Ok mate.

I haven’t changed anything you’ve produced as I simply don’t know what I’m doing haha.

I will test this tonight though, thank you (again).

[richjulian15]

It hasn’t picked up 2-0 in the Juve game.

I’m guessing you’re fresh out of ideas and this is maybe the end of the road?

[Dabbla]

Not sure why that was.
I was just about to post this :
I have tested it on 3 markets and it did work as designed.
However a 89 minute goal did not register probably due to lack of odds movement.
The team was 1 up.
The second had 2 red cards which triggered as goals.
The 3rd worked perfect.
I have not gone through the reports with a fine toothcomb but the signals do match to the game goals ,cards, so all looks good.

[richjulian15]

I run in practice mode - do you think this makes a difference?

Do you need a watch list up? I hadn’t considered that.

[Dabbla]

The Juventus game did not move more than 10 ticks for the second goal. So it won’t register a goal.
That’s the issue using with this sort of bot it works best in competitive matches

juve chart.PNG

[richjulian15]

Ok mate. Thanks for clearing that up. I’ll continue with the file.

[charlespeter]

Hello there

I'm afraid I'm a bit lost and wonder whether you could help me. I like to lay the 3.5 goals market and green up after 3 goals (whether green or red). I've really been trying hard to get this signal to do that but without success. I wonder if Dallas could help me please.

Here's hoping

[Dallas]

Hello there

I'm afraid I'm a bit lost and wonder whether you could help me. I like to lay the 3.5 goals market and green up after 3 goals (whether green or red). I've really been trying hard to get this signal to do that but without success. I wonder if Dallas could help me please.

Here's hoping

If your using the Signal Goals O-U 2.5 from the opening post then it should be straight forward by following the instructions in the 2nd post (even though your trading on 3.5mkt its the same principal)

If you've done those but are still still stuck if you post up your file i'll take a quick look

[BrianDee]

Someone mentioned Stored Values for this but I'm not seeing an example of their use?
The attached sample Guardian bot requires a fairly recent version of BA (IIRC, the Betdaq version doesnt have stored values).
Attached file will work on the OU2.5 Goal or OU3.5 and puts up an Event-wide counter for goals scored, i.e. pre-KO it's set to zero.
So you can use the counter called goalcount

Goal Signal.baf

on other market/s for the Event.

Usual caveats:-
This bot doesnt trade
Check all settings meet your requirements
No guarantees, express or implied

[dzhonkz]

Hi, Dallas

Thank you for your work!
I have used your file for backing Unders after the first goal has been scored. I have used "Best Market Price" when making a Back rule.

But i have noticed that the bot acts too fast and sometimes backs Unders at a much lower price than it could after the market has reopened. For example bot backed Unders at 2.75, but several seconds after the market is trading at 3.3-3.35

How can I make the bot act a bit slower or back when the market will settle around some stable price?