Lay O2.5/O3.5 after a goal is scored

[markgillespie658]

Wanted to practice this strategy, basically scalping the market after a goal (for hopefully a couple of ticks). In and out of the market but automatically redding out if there's another goal.

Can anyone point me in the right direction? New to it and slowly getting up to speed with automation. Thanks.

[Dallas]

This will do the type of thing you are after, it looks to place the bet following a goal, its then upto you what you want to do after that ie, offset bet with greening, leave for a period of time then green up, or leave till another goal etc
viewtopic.php?f=50&t=16255

If you get stuck just post back with what it is you want to do once your bet is matched

[markgillespie658]

Amazing- will try this out in practice mode. Trying to model this on projected low scoring markets where there's an early goal. Would be looking to stay in for 5-10 minutes max, then green or red up. Is this something I can add under 'Rule Type'? Cheers!

[Dallas]

Amazing- will try this out in practice mode. Trying to model this on projected low scoring markets where there's an early goal. Would be looking to stay in for 5-10 minutes max, then green or red up. Is this something I can add under 'Rule Type'? Cheers!

Yes, on the existing lay rule you could set a signal or store a value when that triggers.
Then you'd add a green all selections rule with either a Signal Changed or Stored Value changed condition and set the time there

ie, the green up rule would trigger 600secs after the signal or stored value was set by the lay bet rule

[markgillespie658]

Is this right? Trying to get the green up to trigger 10-15 minutes after the Lay is matched.

Screenshot 2020-12-10 235146.png

[Dallas]

Is this right? Trying to get the green up to trigger 10-15 minutes after the Lay is matched.

Screenshot 2020-12-10 235146.png

No, you need to put that back how it was
The only change on that rule to make is on the Signal tab and Set a Signal on the market (give it any name and value you want)

Then click the green plus icon to add a new rule.
and select the rule type 'Green All Selections'
Then add a Signal changed condition
Has the Signal named (whatever you called it above)
changed between 600 and 900 secs ago

[markgillespie658]

Sorry, are you able to walk me through this? Have changed back to the original and made changes you suggest (See attachments)

Also where do I find the green plus icon to add new rule and select rule type to green selections?

In Conditions do I just write "Has Green/ Red after 15 changed 900 seconds ago"?

Thanks.

[Dallas]

On the Lay overs rule on the Signal tab Set a Signal on the market (give it any name and value you want - ive used the name delay)

1.JPG

Then click the green plus icon to add a new rule in the top left corner
and select the rule type 'Green All Selections'

2.JPG

Then add a Signal changed condition
Has the Signal named - delay
changed between 600 and 900 secs ago

3.JPG

[markgillespie658]

Amazing! Cheers for walking me through that so quickly. Will be testing this out on selected weekend fixtures, and adjust as we go.

[Dallas]

Amazing! Cheers for walking me through that so quickly. Will be testing this out on selected weekend fixtures, and adjust as we go.

No problem, you might want to arm the Green up rule to trigger 3 or 4 times to ensure you get matched.

This is done at the bottom of the 'General' tab in the rules editor, next to it i'd set the re-arm time to around 15 secs

[markgillespie658]

Did a first sweep of 60 or so fixtures in practice mode. Doesn't seem to pick up enough to get matched on the lays. Prices too low? Wondering if I need to add a couple of ticks to the under 1.5 SV?