I use watch lists all the time and do put score in the headers for each match. Best way to do this is use a coupon to create your filters and get you matches, then using the coupon, add the matches to a watch list. Then in the coupon create your custom alert columns and using an alert condition in your baf, specify the SV for the market\Event that you wish to add to whichever row\header in the watch list. You can combine Home Score & ":" & Away Score into a text SV to use as the SV for the alert. I update my alert every few seconds, switching off any pop boxes or log entries
I'm away from my pc at the moment so can't give you an example, but it's quite straightforward
Football - knowing the CURRENT SCORE
There's an example here which made using Siburs file to then display the scores (and in-play minutes) in a watchlist/coupon
viewtopic.php?t=28028
viewtopic.php?t=28028
sniffer66 wrote: ↑Wed Feb 28, 2024 11:07 amI should have knownDallas wrote: ↑Wed Feb 28, 2024 11:05 amThere's an example here which made using Siburs file to then display the scores (and in-play minutes) in a watchlist/coupon
viewtopic.php?t=28028![]()


**** NEW VERSION ****
I've been working on improving the BAF. Here are the changes.
1. Current Minute in the match
Two new Event SVs have been added:
GameMins
Holds the current minute in the match. It uses any half time market by determining when it closes to detect when half time begins. I then reset the clock back to 45 (as it will have moved further on for first half stoppages) I then start counting again 15 minutes after the half time interval. Obviously this is an approximation but I am helping somebody else with automating their strategy and its good enough for what they need. I did experiment by detecting when odds started changing but really this proved the simplest and most accurate way to do it. I have ideas for the future to make this bang on accurate but that's for another day. Generally its pretty good - a 1-3 minutes out most of the time and occasionally wildly out if the ref forgets his whistle!
TO MAKE THIS WORK YOU NEED TO INCLUDE ANY HALF TIME MARKET IN GUARDIAN (and apply this BAF) - Not HT/FT!
Half
1=1st Half
2=2nd Half
0=Half Time
If you are using these SVs in a condition, please remember to use the Event scope.
2. Fix to Score Event Stored Value
There was bug which means the value stored here wasn't correct. It should hold the id of the selection in Betfair. Apologies if you are using this in your BAF file - you will need to change it if you are conditioning on any of the values.
They now match Betfair ie.
0-0=1
0-1=4
0-2=9
0-3=16
1-0=2
1-1=3
1-2=8
1-3=15
2-0=5
2-1=6
2-2=7
2-3=14
3-0=10
3-1=11
3-2-12
3-3=13
AOHW=9063254
AOAW=9063255
AODW=9063256
If any of you are struggling with your automation and would like me to help, I would be interested to hear from you. Please email me at [email protected]
I've been working on improving the BAF. Here are the changes.
1. Current Minute in the match
Two new Event SVs have been added:
GameMins
Holds the current minute in the match. It uses any half time market by determining when it closes to detect when half time begins. I then reset the clock back to 45 (as it will have moved further on for first half stoppages) I then start counting again 15 minutes after the half time interval. Obviously this is an approximation but I am helping somebody else with automating their strategy and its good enough for what they need. I did experiment by detecting when odds started changing but really this proved the simplest and most accurate way to do it. I have ideas for the future to make this bang on accurate but that's for another day. Generally its pretty good - a 1-3 minutes out most of the time and occasionally wildly out if the ref forgets his whistle!
TO MAKE THIS WORK YOU NEED TO INCLUDE ANY HALF TIME MARKET IN GUARDIAN (and apply this BAF) - Not HT/FT!
Half
1=1st Half
2=2nd Half
0=Half Time
If you are using these SVs in a condition, please remember to use the Event scope.
2. Fix to Score Event Stored Value
There was bug which means the value stored here wasn't correct. It should hold the id of the selection in Betfair. Apologies if you are using this in your BAF file - you will need to change it if you are conditioning on any of the values.
They now match Betfair ie.
0-0=1
0-1=4
0-2=9
0-3=16
1-0=2
1-1=3
1-2=8
1-3=15
2-0=5
2-1=6
2-2=7
2-3=14
3-0=10
3-1=11
3-2-12
3-3=13
AOHW=9063254
AOAW=9063255
AODW=9063256
If any of you are struggling with your automation and would like me to help, I would be interested to hear from you. Please email me at [email protected]
You do not have the required permissions to view the files attached to this post.
Last edited by sibur on Tue Apr 09, 2024 3:52 pm, edited 1 time in total.
- jamesedwards
- Posts: 3916
- Joined: Wed Nov 21, 2018 6:16 pm
Nice work. Where does the xG come from?
- jamesedwards
- Posts: 3916
- Joined: Wed Nov 21, 2018 6:16 pm
I see. I thought perhaps it was a live xG based on chances created, but sounds like it's the predicted goals total for the whole match based on odds before kick off?
Yes, prior to Kick offjamesedwards wrote: ↑Tue Apr 09, 2024 3:29 pmI see. I thought perhaps it was a live xG based on chances created, but sounds like it's the predicted goals total for the whole match based on odds before kick off?
sibur wrote: ↑Tue Apr 09, 2024 2:49 pm**** NEW VERSION ****
Mins and Half.jpg
I've been working on improving the BAF. Here are the changes.
1. Current Minute in the match
Two new Event SVs have been added:
GameMins
Holds the current minute in the match. It uses any half time market by determining when it closes to detect when half time begins. I then reset the clock back to 45 (as it will have moved further on for first half stoppages) I then start counting again 15 minutes after the half time interval. Obviously this is an approximation but I am helping somebody else with automating their strategy and its good enough for what they need. I did experiment by detecting when odds started changing but really this proved the simplest and most accurate way to do it. I have ideas for the future to make this bang on accurate but that's for another day. Generally its pretty good - a 1-3 minutes out most of the time and occasionally wildly out if the ref forgets his whistle!
TO MAKE THIS WORK YOU NEED TO INCLUDE ANY HALF TIME MARKET IN GUARDIAN (and apply this BAF) - Not HT/FT!
Half
1=1st Half
2=2nd Half
0=Half Time
If you are using these SVs in a condition, please remember to use the Event scope.
2. Fix to Score Event Stored Value
There was bug which means the value stored here wasn't correct. It should hold the id of the selection in Betfair. Apologies if you are using this in your BAF file - you will need to change it if you are conditioning on any of the values.
They now match Betfair ie.
0-0=1
0-1=4
0-2=9
0-3=16
1-0=2
1-1=3
1-2=8
1-3=15
2-0=5
2-1=6
2-2=7
2-3=14
3-0=10
3-1=11
3-2-12
3-3=13
AOHW=9063254
AOAW=9063255
AODW=9063256
If any of you are struggling with your automation and would like me to help, I would be interested to hear from you. Please email me at [email protected]
There was a mistake in the previous post which stated that you could use ANY Half Time market . This is wrong. Please only use HALF_TIME or HALF_TIME_SCORE markets.
You will also need to use the amended BAF
You do not have the required permissions to view the files attached to this post.
This works a treat in displaying the current score, minute and half - thank you @sibur for creating and sharing.
One thing I am trying to do is use the GameMins condition to enter the market at 60 minutes and place a lay bet on the current score, therefore I am
Thanks,
Paul
One thing I am trying to do is use the GameMins condition to enter the market at 60 minutes and place a lay bet on the current score, therefore I am
- placing a lay bet in position 1 (sorted in order of favouritism)
- setting a condition of 'GameMins' for the event >=60
- keeping all unmatched bets
Thanks,
Paul
Hi Paul
Not sure exactly. Can you forward a screenshot of each condition?
When conditions don't work for me, I strip everything back and add one condition at a time until it stops working (or the other way, by removing a condition at a time until it works, then add the missing ones back in)and then you'll know what is causing the problem.
Not sure exactly. Can you forward a screenshot of each condition?
When conditions don't work for me, I strip everything back and add one condition at a time until it stops working (or the other way, by removing a condition at a time until it works, then add the missing ones back in)and then you'll know what is causing the problem.
Thank you @Sibur. I have attempted to combine with Dallas's 'Lay Current Correct Score in Final 10mins Guardian Automation Bot' which I found here viewtopic.php?t=13776
This is a helpful bot as it ignores score lines where at least one team has scored 4 or more goals and which I want to avoid. However, I have removed the timings and replaced with what I thought was a condition related to GameMins that would trigger a lay bet at a fixed price of 3.00. I have attached a screenshot of the conditions below.
This is a helpful bot as it ignores score lines where at least one team has scored 4 or more goals and which I want to avoid. However, I have removed the timings and replaced with what I thought was a condition related to GameMins that would trigger a lay bet at a fixed price of 3.00. I have attached a screenshot of the conditions below.
You do not have the required permissions to view the files attached to this post.
I'm not familiar with the bot and never use signals, but what I would do is strip all conditions back except GameMins > 60 in practice mode.(also check you're using the half time market as it needs that to detect HT)
See that the condition is triggered at the correct moment. If not then it's something specific to my stuff , if it's working then it's probably the bot.
You could also show GameMins as a column to easily see when the condition should be triggered.
See that the condition is triggered at the correct moment. If not then it's something specific to my stuff , if it's working then it's probably the bot.
You could also show GameMins as a column to easily see when the condition should be triggered.
Hi Sibur,
I took your advice and stripped back my bot, removing all the signals in relation to ignoring the score lines where at least one team has scored 4 or more goals. And it now works! Your baf triggered my bot, which laid the current score at 60 mins. I now need to start building back in those scores which I want my bot to ignore.
Thanks again for your help and advice.
Paul
I took your advice and stripped back my bot, removing all the signals in relation to ignoring the score lines where at least one team has scored 4 or more goals. And it now works! Your baf triggered my bot, which laid the current score at 60 mins. I now need to start building back in those scores which I want my bot to ignore.
Thanks again for your help and advice.
Paul