Display Real Time Velocity and Cadence Fluctuations and Errors with Single Bet Buttons - One Click Screen Settings

[Dallas]

Using these settings and its good thank you.
Ive added a custom column for speed which is working fine, though by default its not in MPH.
How do I alter the displayed value so it shows MPH please ?

The speed arrives from TPD in m/s, to convert to MPH on the stored value that stores the speed you need to use the adjustment area and multiple it by an entered amount of 2.23694

[sIGNAL]

Using these settings and its good thank you.
Ive added a custom column for speed which is working fine, though by default its not in MPH.
How do I alter the displayed value so it shows MPH please ?

The speed arrives from TPD in m/s, to convert to MPH on the stored value that stores the speed you need to use the adjustment area and multiple it by an entered amount of 2.23694

OK thanks but where can i edit that stored value as Im using BA 1.61b and I believe that the TPD data defaults are already available in this version without the use of a rules file so Im not sure where I go to edit that value ?

Or do I have to use a rules files for the MPH column ?
Sorry If im being stupid, still getting my head around the TPD data and rules.

See my current screenshot which Ive modified from your Velocity and Cadence rules file.

[Dallas]

Using these settings and its good thank you.
Ive added a custom column for speed which is working fine, though by default its not in MPH.
How do I alter the displayed value so it shows MPH please ?

The speed arrives from TPD in m/s, to convert to MPH on the stored value that stores the speed you need to use the adjustment area and multiple it by an entered amount of 2.23694

OK thanks but where can i edit that stored value as Im using BA 1.61b and I believe that the TPD data defaults are already available in this version without the use of a rules file so Im not sure where I go to edit that value ?

Or do I have to use a rules files for the MPH column ?
Sorry If im being stupid, still getting my head around the TPD data and rules.

See my current screenshot which Ive modified from your Velocity and Cadence rules file.

You need to use a rules file and store it as a value
Then use the custom column editor to display the stored value name rather than selecting it from pre-set information options

[sIGNAL]

The speed arrives from TPD in m/s, to convert to MPH on the stored value that stores the speed you need to use the adjustment area and multiple it by an entered amount of 2.23694

OK thanks but where can i edit that stored value as Im using BA 1.61b and I believe that the TPD data defaults are already available in this version without the use of a rules file so Im not sure where I go to edit that value ?

Or do I have to use a rules files for the MPH column ?
Sorry If im being stupid, still getting my head around the TPD data and rules.

See my current screenshot which Ive modified from your Velocity and Cadence rules file.

You need to use a rules file and store it as a value
Then use the custom column editor to display the stored value name rather than selecting it from pre-set information options

ok I understand it now. thank you Dallas

[Systemagic]

thanks p[al appreciate that

[Brovashift]

With this velocity data are we able to show/use the velocity chart? Looks useful to monitor jumping efficency.

TIA

[Dallas]

With this velocity data are we able to show/use the velocity chart? Looks useful to monitor jumping efficency.

TIA

You should be able to recreate something along those lines yes
It would just be a case of putting the values into a History list then plotting a chart with those values

[Brovashift]

With this velocity data are we able to show/use the velocity chart? Looks useful to monitor jumping efficency.

TIA

You should be able to recreate something along those lines yes
It would just be a case of putting the values into a History list then plotting a chart with those values

Ah... with advanced charts? Good idea

Thanks

[ads13]

I've tried to follow these instructions but when I click on the star icon, there is no option to import. Appreciate this post is a couple of years old, has the app changed and this needs doing a different way at all?

[Dallas]

I've tried to follow these instructions but when I click on the star icon, there is no option to import. Appreciate this post is a couple of years old, has the app changed and this needs doing a different way at all?

Nothing has changed with regards to the default button/Icon locations
Click on the word 'settings', its also located on that sub menu

[ads13]

Thank you, and apologies for asking so many questions.

I've now done both things, I've clicked on the first race at Hereford (after checking the TPD tracks) but my one click screen doesn't show velocity and cadence columns still. On the toolbar for the one click screen there are a couple of options there for TPD position and TPD to finish but not the others.

[Dallas]

Thank you, and apologies for asking so many questions.

I've now done both things, I've clicked on the first race at Hereford (after checking the TPD tracks) but my one click screen doesn't show velocity and cadence columns still. On the toolbar for the one click screen there are a couple of options there for TPD position and TPD to finish but not the others.

This layout doesn't contain the positions or distance to finish which mean you still have your old grid layout profile selected and not this one you've just imported

[ads13]

I’m trying to upload an image but it’s saying too large. I’ve imported the Velocity & Cadence w_single bet buttons and have selected this from the dropdown but that’s what it shows. Is there another step that I’ve missed at all?

[Dallas]

I’m trying to upload an image but it’s saying too large. I’ve imported the Velocity & Cadence w_single bet buttons and have selected this from the dropdown but that’s what it shows. Is there another step that I’ve missed at all?

There are files for the custom columns and the grid layout in the opening post which both need to be imported then selected.

The first image in the opening post shows were both the custom column (.bcc file) and grid layout (.bgl) should be selected

[ads13]

I’ve just checked everything and that’s exactly what I’ve done. When I go to import, it only allows me to import the appropriate file type so I can’t see anything that isn’t correct. Is there anything I can do to share my setup with you at all?