Conditions Query - Need help Please

[Simoba]

Hi Guys,

Is it possible to add two conditions to a market please? As per attached, I have a lay home automation, where the conditions of the DRAW price is only between 3.20 and 3.70 at 5 minutes before kick off. How do I add another condition please, where that LAY HOME bet is only struck where the lay home is priced say between 2.0 and 5.0 ? I want to add that filter so I am not laying at any price under 2.0 or over 5.0. Not sure if this is possible, however I would be really most grateful for any assistance please. Thank you

Lay Home - Conditions.png

[Dallas]

Just add a further two fixed odds conditions to create the price range just as you've done for the draw
Only this time leave the 'Current (in betfair row 1)' box ticked so that you are testing the price of the home team

[Simoba]

Just add a further two fixed odds conditions to create the price range just as you've done for the draw
Only this time leave the 'Current (in betfair row 1)' box ticked so that you are testing the price of the home team

Thank you ever so much. So simple eh !! I shall give that a go. Thanks again for taking the trouble to reply, appreciated.

[Simoba]

Just add a further two fixed odds conditions to create the price range just as you've done for the draw
Only this time leave the 'Current (in betfair row 1)' box ticked so that you are testing the price of the home team

Hi Dallas, sorry to bother you re this, however the automation did not work, can you please advise what I am doing wrong as all conditions were met? As you can see the draw (row 3) was less than 3.15 and the lay home was between 1.7 and 8.2, so it should have fired, however it did not? Thank you for your help.

Screenshot 2025-11-22 135638.png

Conditions.png

Conditions.png

[Dallas]

Just add a further two fixed odds conditions to create the price range just as you've done for the draw
Only this time leave the 'Current (in betfair row 1)' box ticked so that you are testing the price of the home team

Hi Dallas, sorry to bother you re this, however the automation did not work, can you please advise what I am doing wrong as all conditions were met? As you can see the draw (row 3) was less than 3.15 and the lay home was between 1.7 and 8.2, so it should have fired, however it did not? Thank you for your help.Screenshot 2025-11-22 135638.pngConditions.pngConditions.png

You've changed the draw odds from your original screenshot where you had them greater than 3.15 and less than 3.75

In your current screenshot you have them as less than 3.15 and greater than 3.25 (which both can never be true at the same time)

If you are not trying to test the price of a selection is between two values and instead now wanting to check its either below a value and above a value (but not a value in-between), then as both can never be true and satisfied at the same time you need to nest those two conditions within a group which requires 'One or more of the conditions in the group must be true)
https://www.betangel.com/user-guide/gro ... tions.html

[jamesedwards]

Just add a further two fixed odds conditions to create the price range just as you've done for the draw
Only this time leave the 'Current (in betfair row 1)' box ticked so that you are testing the price of the home team

Hi Dallas, sorry to bother you re this, however the automation did not work, can you please advise what I am doing wrong as all conditions were met? As you can see the draw (row 3) was less than 3.15 and the lay home was between 1.7 and 8.2, so it should have fired, however it did not? Thank you for your help.Screenshot 2025-11-22 135638.pngConditions.pngConditions.png

You have the draw odds needing to be <3.15 and >3.25 which is impossible.

[Simoba]

Just add a further two fixed odds conditions to create the price range just as you've done for the draw
Only this time leave the 'Current (in betfair row 1)' box ticked so that you are testing the price of the home team

Hi Dallas, sorry to bother you re this, however the automation did not work, can you please advise what I am doing wrong as all conditions were met? As you can see the draw (row 3) was less than 3.15 and the lay home was between 1.7 and 8.2, so it should have fired, however it did not? Thank you for your help.Screenshot 2025-11-22 135638.pngConditions.pngConditions.png

You've changed the draw odds from your original screenshot where you had them greater than 3.15 and less than 3.75

In your current screenshot you have them as less than 3.15 and greater than 3.25 (which both can never be true at the same time)

If you are not trying to test the price of a selection is between two values and instead now wanting to check its either below a value and above a value (but not a value in-between), then as both can never be true and satisfied at the same time you need to nest those two conditions within a group which requires 'One or more of the conditions in the group must be true)
https://www.betangel.com/user-guide/gro ... tions.html

Thanks Dallas, yes it is less than 3.15 OR greater than 3.25 so I shall amend as you say. Thank you for your time.

[Simoba]

Just add a further two fixed odds conditions to create the price range just as you've done for the draw
Only this time leave the 'Current (in betfair row 1)' box ticked so that you are testing the price of the home team

Hi Dallas, sorry to bother you re this, however the automation did not work, can you please advise what I am doing wrong as all conditions were met? As you can see the draw (row 3) was less than 3.15 and the lay home was between 1.7 and 8.2, so it should have fired, however it did not? Thank you for your help.Screenshot 2025-11-22 135638.pngConditions.pngConditions.png

You've changed the draw odds from your original screenshot where you had them greater than 3.15 and less than 3.75

In your current screenshot you have them as less than 3.15 and greater than 3.25 (which both can never be true at the same time)

If you are not trying to test the price of a selection is between two values and instead now wanting to check its either below a value and above a value (but not a value in-between), then as both can never be true and satisfied at the same time you need to nest those two conditions within a group which requires 'One or more of the conditions in the group must be true)
https://www.betangel.com/user-guide/gro ... tions.html

So this should do the trick Dallas ? Thanks ever so much !

Group Conditions.png

[Dallas]

Hi Dallas, sorry to bother you re this, however the automation did not work, can you please advise what I am doing wrong as all conditions were met? As you can see the draw (row 3) was less than 3.15 and the lay home was between 1.7 and 8.2, so it should have fired, however it did not? Thank you for your help.Screenshot 2025-11-22 135638.pngConditions.pngConditions.png

You've changed the draw odds from your original screenshot where you had them greater than 3.15 and less than 3.75

In your current screenshot you have them as less than 3.15 and greater than 3.25 (which both can never be true at the same time)

If you are not trying to test the price of a selection is between two values and instead now wanting to check its either below a value and above a value (but not a value in-between), then as both can never be true and satisfied at the same time you need to nest those two conditions within a group which requires 'One or more of the conditions in the group must be true)
https://www.betangel.com/user-guide/gro ... tions.html

So this should do the trick Dallas ? Thanks ever so much !Group Conditions.png

Yes, that is correct

[Simoba]

You've changed the draw odds from your original screenshot where you had them greater than 3.15 and less than 3.75

In your current screenshot you have them as less than 3.15 and greater than 3.25 (which both can never be true at the same time)

If you are not trying to test the price of a selection is between two values and instead now wanting to check its either below a value and above a value (but not a value in-between), then as both can never be true and satisfied at the same time you need to nest those two conditions within a group which requires 'One or more of the conditions in the group must be true)
https://www.betangel.com/user-guide/gro ... tions.html

So this should do the trick Dallas ? Thanks ever so much !Group Conditions.png

Yes, that is correct

Thanks a million, take care