Yep, when i went to university there wasn't any computers!
I can't for the life of me see how i can include the whole field or even move from the first 3 runners.
Any advice appreciated, mark
on ladder screen can only get first 3 runners?
-
markjohnconley
- Posts: 16
- Joined: Fri Jul 06, 2012 2:01 pm
Worked it out myself, relax everyone, mark
There is a really good operating manual http://www.betangel.com/user-guide/bap.php and this video http://www.youtube.com/watch?v=DWn7RRFSt_g&feature=plcp
But to do this you need|;
>settings which is the 3rd tab at the top of the screen
> Edit settings
> Ladder settings
> At the bottom you will see "maximum number of ladders".
> You will need to save this as a settings profile otherwise it defaults back all the time.
After you have changed to amount of ladders to what you want click on save as, save the profile under whatever name you want (6 ladders?)
All the other settings are in these tabs, if you change something you need to save the profile either as the same profile or a different one.
Sounds complex but really isn't. I advise you to find this bit in the manual as it explains it way better than I can (I did't get to go to uni!!)
But to do this you need|;
>settings which is the 3rd tab at the top of the screen
> Edit settings
> Ladder settings
> At the bottom you will see "maximum number of ladders".
> You will need to save this as a settings profile otherwise it defaults back all the time.
After you have changed to amount of ladders to what you want click on save as, save the profile under whatever name you want (6 ladders?)
All the other settings are in these tabs, if you change something you need to save the profile either as the same profile or a different one.
Sounds complex but really isn't. I advise you to find this bit in the manual as it explains it way better than I can (I did't get to go to uni!!)