DUTCHING AUTOMATION
-
The Dutchman
- Posts: 2
- Joined: Fri Jul 11, 2014 2:42 am
How do you set up the automation for the Dutching module to automatically fire in bets (either at the lay or back price) approx 2 mins prior to the off. If the orders are not filled at the off they should then be executed at the SP.
You can automate dutching using the basic automation settings in the settings editor. Here you can set book % and total stake as the trigger parameters. This is probably the quickest way but you need to reset the automation after each event and there are no timing parameters you can use.
You can also tie that in with advanced Guardian automation to create a simple rule that applys 'TAKE SP' to all unmatched bets just prior to the start of an event.
To use timed bets to dutching you would need to use advanced automation and create a rule for each market selection you wish to place a bet on. The liability can be set by book % in the parameters tab. For example, if the price is 5.0 and you use stakes of £100 it will place a bet of £20 (1/5 = 20%). A book % condition is available also.
Then set your automation timings as you wish.
You can also tie that in with advanced Guardian automation to create a simple rule that applys 'TAKE SP' to all unmatched bets just prior to the start of an event.
To use timed bets to dutching you would need to use advanced automation and create a rule for each market selection you wish to place a bet on. The liability can be set by book % in the parameters tab. For example, if the price is 5.0 and you use stakes of £100 it will place a bet of £20 (1/5 = 20%). A book % condition is available also.
Then set your automation timings as you wish.