I've just got a new PC for use this afternoon but can't run betangel, error message is 'Could not establish trust relationship for the SSL / TLS secure channel.' I also can't log in to the betfair site. I'm on windows XP.
Can someone please tell me how to resolve this before racing starts? I've tried adding betfair to list of trusted sites in internet explorer but doesn't help.
Thanks
HELP! - can't log in due to security sertificate problem
The same situation in my place. Time seems to be correct and I did not any changes on my computer.
@newton: Does that problem starts at 1:30 pm as your post suggests? The same time at my place. I tried to use a cloud computer with a different system software and things work fine there. I use Windows XP over Parallels on a mac. Is it similar to your system?
I already thought about expired certifivations but couldn't finde one...
@newton: Does that problem starts at 1:30 pm as your post suggests? The same time at my place. I tried to use a cloud computer with a different system software and things work fine there. I use Windows XP over Parallels on a mac. Is it similar to your system?
I already thought about expired certifivations but couldn't finde one...
That's what I thought. Cause usually certifications will be updated by this as well. But when i tried to update the system did not find the relevant page. So I thought that this is the result of finishing support for windows xp by microsoft.
Did you update your system afterwards and in which way??
Did you update your system afterwards and in which way??
Windows Server 2003:
1. Click on the ‘Start Menu’
2. Select ‘All Programs’
3. Select ‘Windows Update’
4. Select the ‘Custom’ option to check for all the latest available updates
5. Click on ‘Select by Type’ from the left-hand side of the screen
6. Click on ‘High Priority’ from the left-hand side of the screen
7. Select ‘Review and install updates’ at the top
8. Make sure the box for the update you wish to install is ticked or simply choose to install all available
updates
9. Click ‘Install updates’
Upon completion, you will be prompted to restart the server for the updates to take effect. Once you’ve done that,
your server will no longer be vulnerable to Sandworm.
You will need to follow these steps for each of the Windows Server 2003 you have with Tagadab. OPERATING SYSTEMS
Sandworm Vulnerability
Page | 2
©2008-2014 Tagadab | All Rights Reserved
Windows Server 2008:
1. Click on the ‘Start’ menu
2. Select ‘All Programs’
3. Select ‘Windows Update’
4. Click ‘Check for updates’ from the left-hand side of the screen
5. Then click ‘Change settings’ from the left-hand side of the screen
6. From the ‘Important updates’ dropdown, select ‘Download updates but let me choose whether to install
them’
7. Click on ‘Updates are available’
8. Make sure the box for the update you wish to install is ticked or simply choose to install all available
updates
9. Click ‘Install updates’
Upon completion, you will be prompted to restart the server for the updates to take effect. Once you’ve done that,
your server will no longer be vulnerable to Sandworm.
You will need to follow these steps for each of the Windows Server 2008 you have with Tagadab.
Windows Server 2012:
1. Click on the ‘Start’ menu
2. Open the Control Panel
3. Select ‘System and Security’ (this will only appear if the control panel is in ‘Category’ view but if it isn’t
then ‘Windows Update’ will be one of the items listed under ‘All Control Panel Items’)
4. Click on ‘Windows Update’
5. Click ‘Check for updates’ from the left-hand side of the screen
6. From the ‘Important update’s’ dropdown, select ‘Download updates but let me choose whether to install
them’
7. Click on ‘Updates are available’
8. Make sure the box for the update you wish to install is ticked or simply choose to install all available
updates
9. Click ‘Install updates’
1. Click on the ‘Start Menu’
2. Select ‘All Programs’
3. Select ‘Windows Update’
4. Select the ‘Custom’ option to check for all the latest available updates
5. Click on ‘Select by Type’ from the left-hand side of the screen
6. Click on ‘High Priority’ from the left-hand side of the screen
7. Select ‘Review and install updates’ at the top
8. Make sure the box for the update you wish to install is ticked or simply choose to install all available
updates
9. Click ‘Install updates’
Upon completion, you will be prompted to restart the server for the updates to take effect. Once you’ve done that,
your server will no longer be vulnerable to Sandworm.
You will need to follow these steps for each of the Windows Server 2003 you have with Tagadab. OPERATING SYSTEMS
Sandworm Vulnerability
Page | 2
©2008-2014 Tagadab | All Rights Reserved
Windows Server 2008:
1. Click on the ‘Start’ menu
2. Select ‘All Programs’
3. Select ‘Windows Update’
4. Click ‘Check for updates’ from the left-hand side of the screen
5. Then click ‘Change settings’ from the left-hand side of the screen
6. From the ‘Important updates’ dropdown, select ‘Download updates but let me choose whether to install
them’
7. Click on ‘Updates are available’
8. Make sure the box for the update you wish to install is ticked or simply choose to install all available
updates
9. Click ‘Install updates’
Upon completion, you will be prompted to restart the server for the updates to take effect. Once you’ve done that,
your server will no longer be vulnerable to Sandworm.
You will need to follow these steps for each of the Windows Server 2008 you have with Tagadab.
Windows Server 2012:
1. Click on the ‘Start’ menu
2. Open the Control Panel
3. Select ‘System and Security’ (this will only appear if the control panel is in ‘Category’ view but if it isn’t
then ‘Windows Update’ will be one of the items listed under ‘All Control Panel Items’)
4. Click on ‘Windows Update’
5. Click ‘Check for updates’ from the left-hand side of the screen
6. From the ‘Important update’s’ dropdown, select ‘Download updates but let me choose whether to install
them’
7. Click on ‘Updates are available’
8. Make sure the box for the update you wish to install is ticked or simply choose to install all available
updates
9. Click ‘Install updates’