Tried the other forums.No help. I FEEL I BOUGHT B.A FOR NADA

User to User support only. For technical support visit www.betangel.com/support/
Post Reply
Sfarad
Posts: 30
Joined: Sun Mar 25, 2012 7:52 am

Basically its how to give betangel a command to back in play a number of horses when in play only if they reach a target profit of say 20%. I have added a pic to show what result I want to get. I just have trouble with guardian doing this, maybe excel would be better.
Anyway here is the pic
http://tinypic.com/r/63t6wj/5

I really seek for guidance
User avatar
superfrank
Posts: 2762
Joined: Fri Aug 14, 2009 8:28 pm

can someone who knows a bit about automation help this guy out?!
Boing
Posts: 134
Joined: Thu Feb 23, 2012 4:06 pm

Can you give an example. I.e. I back £10 at 2 I want to exit when xxxxxxxxx.

When does it place the first bet, at what price, with what stake?

I would think you would back then offset or use the profit condition to trigger the counter bet. If you use the profit condition then you run the risk that it wont get matched inplay.
Zapata
Posts: 213
Joined: Thu Jan 21, 2010 11:58 pm

I can point you in the right direction for triggering the bet.

You need to set your automation triggers first, to do this

Top Menu > Settings > Edit settings > Automation
the Dutching Auto Bet > If Book <= xx % refers to the Book % to trigger (93.6% coloured greenn in your example) - JUST SET TO 100%
You can also set total stake to trigger - SET THIS TO 100 - SAVE AND CLOSE

ON YOUR EXAMPLE PAGE

Select option "Back for a target profit of" and put in 20 (too high as initial tests did not trigger)
To make these triggers work you need to set Auto Bet checkbox AFTER THE RACE STARTS (cancels itself upon Suspend)

PRACTICE MODE
You need to mess about with this in practice mode. The target profit of 20% seems high and my initial tests did not trigger but it does trigger at lower figures.

Good luck.



EDIT:-
Been testing for an hour and a half in practice mode and would be well down - BE CAREFUL!!!!!
Sfarad
Posts: 30
Joined: Sun Mar 25, 2012 7:52 am

THANK YOUUUUUUUUUUUUUUUUUUUUUUU
Post Reply

Return to “Support”